Members ksl Posted December 12, 2020 Members Share Posted December 12, 2020 Hi all~ I need to replace the SPDT sliders, & I picked these up, and wanted to know how to wire up the new ones. Hopefully the pics show you what you need to know. They're simple on/off switches. How do I check for continuity? Thanks in advance. Link to comment Share on other sites More sharing options...
Members gardo Posted December 15, 2020 Members Share Posted December 15, 2020 If you have a volt:/ohm meter it should be fairly easy to figure it out.Just set to ohms to check continuity. Sometimes it helps to make a diagram. You can do it Link to comment Share on other sites More sharing options...
Members mrbrown49 Posted December 15, 2020 Members Share Posted December 15, 2020 Is the bottom pic your new switch? Why are the tabs mangled? It also looks like the top set of tabs is missing. Link to comment Share on other sites More sharing options...
Members badpenguin Posted December 16, 2020 Members Share Posted December 16, 2020 The bottom pic of a switch looks REALLY unhealthy! But.... simply wire the middle lugs together on both switches to output, Pickups goes to top lug. There you go, all fixed. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.