ksl

Howdo all~ My only experience with Brad's pedal is the GS124, that I love!!, but these 2 pedals have recently caught my attention, and I would live to hear some hands-on feedback!! THAT & some real feedback!! Thnx, Kenny ॐ

Does the -EV suffix that you also see everywhere, denote anything important and/or different? I also see many suspiciously low priced 6p14p's out there, Kenny ॐ💃🪕

Greetings.... What's a good choice for my Mesa Boogie DC-3 tube cooker? It's not necessarily a heavily used amp, so sound quality may be a tad more important than longevity. I'm looking at either a quad of RI Tung-Sol EL84's or some of the Soviet 6P14P-EV's. Any thoughts on these 2 choices, or any other comparably priced tubes that would sound fab....?? Thanks in advance ॐ💃

Greetings..... If my memory serves me well, my long gone 57 single pup Jr, & my 59 2 pup TV Yellow Special, had those stop tailpieces that had very little mass to them..... My current Jared James Nichols Epi has a beastly heavy type wraparound tailpiece, which begs the question, do the lower mass stops offer more potential sustain than the intonatable chuncks of stops? If so, I think I'd be willing to forego the ability to intonation & be happier with a more resonant lightweight stop.... Thoughts & results?? Many thnx!!

Greetings,,,, As I revisit a pedal that I have twice owned, then for some reason dumped the FT-2, I'm trying to recall if it truly suffered from 'tone suck', as I sorta recalled...? After having very recently dumped 2 $$ boutiquee filters, i just want a simple filter for that on the edge of Jerry Garcia quack,,, not nearly as pronounced, but just that hint of it,,, W/O the tone suck,,,,, Any of the Q-trons, Nano or otherwise? And not a tone killer, as I play very clean & integrity is parmount.... OR give th FT2 one more whirl?? Ibanez AF-9?? Thnx all!! ॐ💃

Greetings again~ In particular I'm looking at an R2024 Challenger amp, and speaker differentials aside, might it sound anything along the lines of their R2523 Champion, some kickass little firecracker....? Many thanks~ॐ💃

yes I'm aware & thanks,,, Mark's great but I want to know quickly... thnx

Greetings.... Can anyone tell me if this amp employs any negative feedback? Schematics are non existent.... thnx

Thanks again, so just to put a lid on this baby, if I simply wanted to hear just how it sounds w/o the NFB, I could "interrupt" the wire from the spkr jack to the nfb R? And if I liked it, w/o any NFB, I could let it hang as is, perhaps just taping it off, & no othet precautions necessary? thnx

Greetings,,,, just want to know if that single footswitch input on the back is TRS, three ring?? No one who's actively selling one on Ebay or Reverb has any clue.... thnx

Greetings~ I believe I get it... but let's say I just wanna clip the NFB and not have a pot or switch (which I very well might want), could I simply clip either end of the R & leave it taped off, or remove it without completing the circuit that existed previously (w/o that R)? ॐ thnx

And that sound good too!! Greetings.... I've got some real hot 'n nasty amps that roast power tubes; Mesa, Budda, Vox, & Morgan, and I need a great sounding & heat/voltage handling set of tubes.... I recently read about some Preffered Series 7189's that can handle 400+v, and want to know what else is out there that might also be an all-around winner.... Sound, Durability, & won't crap out from the heat. Many thanks~

Greetings,,, I'm in need of a 10" Alnico that lives, breathes, smells, sounds & breaks up like a 12" Blue.... 20-25w range,,,, sensitivity no matter..... Great break-up, but defined, like a Blue~ many thnx, ॐ💃

greetings,, in all the writeups, the use of the Toneprint seems to be tied in to having a computer... Are all these TP settings available in their full capacity from a smart phone as well? thnx

an olde, long gone Fender PS400,, it had a pair of 6550, & a par of 6L6's & tons of other tubes,,,, it weighed just shy of a ton.... left my house once or twice then dumped it.... No regrets but it was certainly unique🥵🥵

Hey Hoot.... Power Scaling is now very commonplace, especially in the mid to high end range, & if properly done, it's way more than simply a Master..... The London Power Scaling is simply the name of the company that supplies many amp builders with the goods!! Budda is still around, & yes, owned by Peavey,,,, The original Tweed & other early Budda designs are stellar!! Jeff Bober, founder, moved on to found East Amplification..... ॐ💃

Greetings,,,, the neck has been sanded, stained, & I want to finish it for a satiny, protective finish.... I believe I did it once, adding several layer, then after the 1st few applications, I sanded, & repeated.... is this the right stuff? thnx

..... with what & how would you rig something in order to trigger that Chorale/Tremolo switch with just the touch of your footwear? And w/o drilling holes......thnx all~

thnx🪕🪕

Hey D'MACK,, I'm not a 'regular' user of delay... period.... but when I do, it's typical for triumphant leads & effect,, &, for me & my senses, there's that great spatiality in that 800ms or so range.... Yeah, 1 sec is too much, but 600ms ain't enough.... I settled on a Red Witch Violetta~ Thnx ॐ💃

greetings,,,, While I was able to look up the different programs available, eo a pedal, I can't hear them,,, But can anyone in the know tell me if there's any better than decent UniVibe programs for tweaking? I'm ready to pull the trigger on a TC VibraClone cuz it's truly different,though lo-fi as it is.... But in the $150 tops range, is there anything similar yet better, OR can I expect a decent & tweakable Toneprint on the Corona MINI and/or the full sized Corona? Thnx ॐ💃 🪕🪕

Hiya guys... I think I'm going to settle on a Mr. Black Mini Echo-Delay.... 860ms, small, with a hint of modulation!!

Greetings,,, Having previously owned an early Twinmaster head, this is my second one, an all original Tweed 1x12 combo from 1995...... I installed a London Power Scaling control that doesn't suck the life out of the tone, like ALL other masters & attenuators.... I spoke with Jeff about it, & i'll never sell it.. ॐ💃

Nuthin' crazy, at least one second delay, but with that swift tape-like DM2 style decay, & smaalll (narrow)....well made.... delay only..... thnx guys & gals ॐ💃

Greetings.... This has been my 4-way switching of choice of late, giving me B-BM-BN-N.... but I now find a need for B-BM-M-N (I have a p/p Vol pot for BN)... How abouts could I make that happen, using my 4-way template? Many thanks....