Members Mike Conway Posted September 29, 2005 Members Share Posted September 29, 2005 OASYS MP3sEDIT: Here are some newer sounds, so I'll put them on top of this post.Filter RhythmVoice used to excite STR-1Strings (Equal mix of factory and Karo Strings)Guitar and synth through VocoderGuitarPad StrummingAudio range LFOs!Slow Dual filtersResSuper SawSynth Bass1st Wave Sequence Wave Sweep and pitch down (Using Y paddle stick to sweep waves)OASYS PROGRAMSHere is a sampling of sounds that I like - mostly single programs. You guys already know about the strings, drums, guitars, and bread and butter sounds. I focused more on pads and synths. I'm very impressed with the HD-1 (sample playback) part of the synth. A bit of Wave Sequencing, among these:Flashlight Wave Pad eXposureLocomotionMountain VoicesMellow ElectricHere are some of the VA sounds. I mangled some of them, by playing with the buttons, pitch stick and Vector joystick:Euro BureauVelocity Filter BassesStradivarious SyncSlo-Filter PadDirty Little GirlLead with a VengeanceI guess I should throw in a few Combis to listen to:Bearded Vulcan EpicAlligator SwampMatrix RecursiveLord of Saturn's RingsEDIT:Okay, I installed the new STR-1 physical modelling engine. While it is geared towards making plucked strings, it can do a lot of weird stuff, too. You can also use samples to "excite" the model.IMITATIVE SOUNDS: Lovers Guitar Clean E. Guitar Buzzy String Guitar VARIATION SOUNDS: Desert Racer (I imagine that Physical Modelling played a part in creating the sounds of the new STAR WARS ships, because this sounds similar.) Chomp Comp Healing Waters (This uses KARMA Wave Sequencing running through the model.)MOD-7: Some scored songs, featuring just the OASYS and nothing else. ESCAPE theme Just added these Youtube EXi demos: Link to comment Share on other sites More sharing options...
Members CoolColJ Posted October 2, 2005 Members Share Posted October 2, 2005 Some more Yamaha VL1 clips I made -I tried to play them sorta authenticly, no breath controller used guitar soundhttp://www.members.optushome.com.au/coolcolj3/Temp/CCJ_VL1_Guitar.mp3sitar sound - turned on portamento halfway throughhttp://www.members.optushome.com.au/coolcolj2/Temp/CCJ_VL1_Sitar.mp3 Link to comment Share on other sites More sharing options...
Members clusterchord Posted October 18, 2005 Author Members Share Posted October 18, 2005 browsing thru some older VSE forum threads, i stumbled upon this: 1) MiniMoog Model D (bass) & Prophet 5 Rev3 (stabs):Night Lights Moroder style. that minimoog thru phaser really sounds KILLER. 2) Jupiter 6 Demo:jup6demo Link to comment Share on other sites More sharing options...
Members HTFYC Posted October 19, 2005 Members Share Posted October 19, 2005 PLEASE KEEP THIS THREAD ALIVE!!! Link to comment Share on other sites More sharing options...
Members Umbra Posted October 19, 2005 Members Share Posted October 19, 2005 Should be a sticky that has dead links weeded out once in a while:thu: Link to comment Share on other sites More sharing options...
Members Jeebus Posted October 20, 2005 Members Share Posted October 20, 2005 This thread really should be a permanent sticky of it's own. How many times has a newbie asked one of the following questions: "what does X sound like?" "what about Y?" "would you choose X or Y, based on sound alone?" Link to comment Share on other sites More sharing options...
Members clusterchord Posted October 20, 2005 Author Members Share Posted October 20, 2005 Originally posted by Umbra Should be a sticky that has dead links weeded out once in a while:thu: i do it every couple of months, i did it last time on Sep, 18. if you expect a regular weekly sweep, it wont happen. people change their urls and htmls every day.. it is impossible to keep it 100% accurate all the time. sorry i just don't have time to do it more often. anyways, most should be working now, and most have been working all the time..but i think its a great idea, if you'd like ito see the lists re-freshed more often and since this thread is, after all, a joint effort, why don't you email or PM me a list of those you stumble upon that don't work no more - i'd be glad to edit the lists.. actually, that's a great idea for all KSS members browsing the lists - if you guys catch a DEAD LINK - PM or email me which one it is.anyways, the thread is kept alive by all KSS members, so as long there's interest in demos, i'm sure it'll be arround.. Link to comment Share on other sites More sharing options...
Members TDman Posted October 20, 2005 Members Share Posted October 20, 2005 :thu: Link to comment Share on other sites More sharing options...
Members clusterchord Posted November 11, 2005 Author Members Share Posted November 11, 2005 a beautiful track late 70s prog-style.done solely on Jupiter 6.by guy called Push-Pull from Switzerland. beside programming skills, very nice arrangement too.Push-Pull : From Io To Calisto (Jupiter 6) :thu:additional clips:digged up by Mikael from VSE, original factory demo of SCI Prophet 10, from 1980 :Prophet 10 Demo (1980)Poly-61:http://www.mendan.com/poly61.mp3for full demo listing check back to page one Link to comment Share on other sites More sharing options...
Members Mutineer Posted November 18, 2005 Members Share Posted November 18, 2005 Wav samples of various synths - Netboy Link to comment Share on other sites More sharing options...
Members gilwe Posted December 3, 2005 Members Share Posted December 3, 2005 A Trident MKII demo done by me, hosted by clusterchord !http://www.babic.com/SYN/TRIDENT/Trident_MKII_Demo.mp3 This particular unit I found at the flea market, had a lot of mud on it... didn't power up. It came that it had about 8-9 different faults which I fixed. The only problems left are a bad SSM2056 I still need to replace, and one of the oscillators which is not in tune until the machine gets to its max temperature. Also, check out samples of my Kawai SX210, herehttp://geocities.com/kawai_sx210/Sound1.mp3http://geocities.com/kawai_sx210/Sound2.mp3http://geocities.com/kawai_sx210/Sound3.mp3http://geocities.com/kawai_sx210/Sound4.mp3http://geocities.com/kawai_sx210/Sound5.mp3http://geocities.com/kawai_sx210/Sound6.mp3http://geocities.com/kawai_sx210/Sound7.mp3http://geocities.com/kawai_sx210/Sound8.mp3http://geocities.com/kawai_sx210/Sound9.mp3http://geocities.com/kawai_sx210/Sound10.mp3http://geocities.com/kawai_sx210/Sound11.mp3http://geocities.com/kawai_sx210/Sound12.mp3http://geocities.com/kawai_sx210/Sound13.mp3http://geocities.com/kawai_sx210/Sound14.mp3http://geocities.com/kawai_sx210/Sound15.mp3http://geocities.com/kawai_sx210/Sound16.mp3 Link to comment Share on other sites More sharing options...
Members CoolColJ Posted December 9, 2005 Members Share Posted December 9, 2005 Hmm I get a lot of people syaing the Andromrda doesn't sound vintage or it can't do bass...well I did this audio clip comparo between a Minimoog and it, and many people couldn't tell which was which, and half of em even preferred the A6 version. http://www.members.optushome.com.au/coolcolj2/Temp/CCJ_Minimoog_vs_A6_16'_SquareBass.mp3 first part is Minimoog, earlier oscillator model D, serial number in the mid 8000s and 2nd part is an AndromedaOff course I made sure to optimise the A6 to sound as good as it can withrespect to it's internal level structure since it will clip very easilyNothing too fancy, "perfect square" setting (pulse set to 52) , Moogy 24dbfilter, no mods or anything fancy.As long as you know what your doing and know the A6 inside out that is -------------later on I did another comparo, this time I just banged out a patch on the A6 toimitate what the Minihad when I turned it on. 2 VCO bass, with sawtooth and square at unisonI didn't spend more than 30mins to match emAt first I thought no way the A6 could do it, they just sound differentBut after phutzing a bit, it came closer than I expected!No tricks or mods. Since the Minimoog drifts like a mofo, and thekeytracking of the VCOis probably out too! You really need to mod the A6's VCOs to get that juiceyeffect.But not too bad at all even despite that, it does sound tighter and moresterile thoughI did two clips one as the background and temperature tuning offhttp://www.members.optushome.com.au/coolcolj2/Mini_A6/CCJ_Mini_A6_BassLead1.mp3and the other just background off, you can here that tighter more phasedsoundhttp://www.members.optushome.com.au/coolcolj2/Mini_A6/CCJ_Mini_A6_BassLead1_temptuned.mp3Off course the Mini sounds better, and I didn't work to get rid of the A6clickinessBut if you heard the A6, you would think Moog bass I'm sure I don't think you'd find another polysynth that can do that! Link to comment Share on other sites More sharing options...
Members DocT Posted December 25, 2005 Members Share Posted December 25, 2005 Evolver Basses Link to comment Share on other sites More sharing options...
Members Twilight Drone Posted January 9, 2006 Members Share Posted January 9, 2006 Synthesizer: Yamaha CS2x Author: Twilight DroneClip title: A Garden of Marble Springs Comments: Multitracked, no external effects http://www.soundclick.com/util/downloadSong.cfm?ID=3141039&key=227931E8-0 Link to comment Share on other sites More sharing options...
Members John B NYC Posted January 19, 2006 Members Share Posted January 19, 2006 Oberheim OB1 http://www.frozen-web.com/samples/OB1.mp3 Just me kinda screwing arround, but i guess you could hear that Link to comment Share on other sites More sharing options...
Members Elhardt Posted February 1, 2006 Members Share Posted February 1, 2006 Here is the Alesis Andromeda imitating boiling liquid, pouring water into a cup, and a sitar-like sound.http://home.att.net/~synth6/A6_Boiling_Liquid.mp3http://home.att.net/~synth6/A6_Pouring_Water.mp3http://home.att.net/~synth6/A6_SemiSitar.mp3 -Elhardt Link to comment Share on other sites More sharing options...
Members Analog Kid Posted February 2, 2006 Members Share Posted February 2, 2006 ChimeD Linear Drift Linear Slop Link to comment Share on other sites More sharing options...
Members DocT Posted February 2, 2006 Members Share Posted February 2, 2006 Originally posted by Analog Kid Great demos Link to comment Share on other sites More sharing options...
Members stikygum Posted February 2, 2006 Members Share Posted February 2, 2006 I like the A6 water stuff. I'm gettin a no go on CoolColJ's stuff. Link to comment Share on other sites More sharing options...
Members FatBaron Posted February 3, 2006 Members Share Posted February 3, 2006 You want special fx? Done completely on a Moog Voyager using no external patching or effects except reverb:http://fatbaron.com/stormynightinjerseycity.mp3 Link to comment Share on other sites More sharing options...
Members clusterchord Posted February 12, 2006 Author Members Share Posted February 12, 2006 microwave 1demos posted a few days ago, by a friend Rasmus at VSE, made me get one myself. the second track is a full multitracked piece reminiscent of early80s Tangerine Dream. drums are machinedrum.mw-demo1mw-demo2 PolysixP6 Sound LibraryMoog 900 ModularMoog 900 Series demo record 1968Andromedapalrad - by Paul Evanblij (AH). demonstrates "racheting" tehnique with A6's analog-style sequencer. Link to comment Share on other sites More sharing options...
Members Napalm Posted February 18, 2006 Members Share Posted February 18, 2006 Some more K5000S goodies:http://www.deepsonic.ch/deep/audio/only_k5ks.mp3http://www.deepsonic.ch/deep/audio/acid_add_2.mp3http://www.deepsonic.ch/deep/audio/k5ks_formant.mp3 Link to comment Share on other sites More sharing options...
Members Don Solaris Posted March 8, 2006 Members Share Posted March 8, 2006 Yamaha SY35 + Yamaha TG33 These are dirt cheap pad machines. I got Yamaha SY35 for 80 EUR and Yamaha TG33 for 60 EUR. Here is a short demo (1MB) i made some time ago that features these two vector synths, no external effects, mixed at the desk, recorded into PC: SY35+TG33 ambient pad sound (1MB) The evolving sound comes from TG33 while SY35 was used for backing. I programmed both sounds. These two are really cheapest pad machines you can get. For more info, please visit Sealed's Deep Synthesis web page. Link to comment Share on other sites More sharing options...
Members anykeystudio Posted March 12, 2006 Members Share Posted March 12, 2006 Hi, got a Andromeda PWM lead sound that i want to share.A6 PWM Lead Link to comment Share on other sites More sharing options...
Members Awake77 Posted April 9, 2006 Members Share Posted April 9, 2006 AX-80 Demo by NightSynth, hosted on my site:Akai AX-80 Demo Kawai K5000S demo, all factory presets:Kawai K5000S Demo Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.