Members PotatoDude Posted January 23, 2021 Members Share Posted January 23, 2021 I need to create a sketch for an SSH (H=mini humbucker in my case) Fender Strat, and I am currently facing two problems creating the sketch: 1. The S pickups are Dimarzio Tele-pickups - which mean, they are smaller by size than the regular Strat single pickups (sketch attached). 2. The humbucker is a Dimarzio Mini-Humbucker (humbucker sketch attached too). The easy way to go is to find a sketch as I described, which I cannot find anywhere, so if there is somewhere something as such... that you know of.. it will make my day and save me tons of time editing the image file with 0 photoshop xp. I have a sketch of a Strat pickguard as an SSH and an SSS. Coping and pasting might be easy, but I am having trouble with defining the distance from each other and from the bridge. Images: SSH - https://imgur.com/YKSAKGZ SSS - https://imgur.com/fVuroV4 single pickup - https://imgur.com/IvcV9TK mini humbucker - https://imgur.com/OGLtMXB Help the PotatoDude. Link to comment Share on other sites More sharing options...
Moderators isaac42 Posted January 23, 2021 Moderators Share Posted January 23, 2021 I don't have anything like that. Being a bass player, I don't have any need for Strat pickguards laying around! On my Squier Strat, the measurement from the bridge to the neck appears to be the same as in the linked drawing. Distance from the bridge cutout on the pickguard to the center of the neck pickup is 145mm. To the center of the middle pickup is 85mm. Center-to-center distance is therefore 60mm. Mine has a bridge single coil, so I can't help you with a mini humbucker measurement, but to the center of the bridge single coil looks to be 28 or 29mm. I'm using a tape measure, so I could be off a little. I doubt that 1mm will make a noticeable difference, though. Link to comment Share on other sites More sharing options...
Members PotatoDude Posted January 23, 2021 Author Members Share Posted January 23, 2021 42 minutes ago, isaac42 said: I don't have anything like that. Being a bass player, I don't have any need for Strat pickguards laying around! On my Squier Strat, the measurement from the bridge to the neck appears to be the same as in the linked drawing. Distance from the bridge cutout on the pickguard to the center of the neck pickup is 145mm. To the center of the middle pickup is 85mm. Center-to-center distance is therefore 60mm. Mine has a bridge single coil, so I can't help you with a mini humbucker measurement, but to the center of the bridge single coil looks to be 28 or 29mm. I'm using a tape measure, so I could be off a little. I doubt that 1mm will make a noticeable difference, though. So.. I guess you have an sss squire and not an ssh(mini) Which I think might have different dimensions overall. Tnx Link to comment Share on other sites More sharing options...
Members DeepEnd Posted January 24, 2021 Members Share Posted January 24, 2021 Have you thought about a regular HSS pickguard with a mini-to-humbucker mounting ring? https://www.stewmac.com/SiteSearch/?search=mini to humbucker mounting ring Dunno if it would work but it might be worth a try. Link to comment Share on other sites More sharing options...
Moderators daddymack Posted January 24, 2021 Moderators Share Posted January 24, 2021 except the single coils he chose are tele sized, not strat. Now my question is...why are you agonizing over the placement? You want the horizontal centerline of the neck and middle pickups as close to relative harmonic points on the strings below the neck. Simple math...easier if you measure the harmonic locations on the neck and translate them [reversed from the bridge] to the pick guard. The bridge p-up, well that is a matter of how close you want it to the bridge for twang. Link to comment Share on other sites More sharing options...
Moderators isaac42 Posted January 24, 2021 Moderators Share Posted January 24, 2021 23 hours ago, PotatoDude said: So.. I guess you have an sss squire and not an ssh(mini) Which I think might have different dimensions overall. Tnx Seems to me that, if there are correct positions for the neck and middle pickups (sweet spots), then they'll be the same, no mater if the bridge pickup is single coil or humbucker. Link to comment Share on other sites More sharing options...
Members DeepEnd Posted January 24, 2021 Members Share Posted January 24, 2021 4 hours ago, isaac42 said: Seems to me that, if there are correct positions for the neck and middle pickups (sweet spots), then they'll be the same, no mater if the bridge pickup is single coil or humbucker. Not to mention, as soon as you fret a note all that carefully calculated geometry goes out of whack anyway. Link to comment Share on other sites More sharing options...
Members PotatoDude Posted January 25, 2021 Author Members Share Posted January 25, 2021 Thank you all ♥️ I have found a humbucker to mini-humbacker adapter on Reverb. And a mounting ring on Aliexpress that should work well, thanks for @DeepEnd for the suggestion. Just for fun, I'm attaching an image of the current horrible hookup I made with pieces of plastic, toothpicks and paper tape I just couldnt wait for the deliveries anymore 😅 Link to comment Share on other sites More sharing options...
Moderators daddymack Posted January 25, 2021 Moderators Share Posted January 25, 2021 what is all that stuff behind the bridge? Link to comment Share on other sites More sharing options...
Members PotatoDude Posted January 25, 2021 Author Members Share Posted January 25, 2021 5 minutes ago, daddymack said: what is all that stuff behind the bridge? Built-in effects. It's a Japanese guitar from the 70s... Don't know a lot about it. It.s built very well (maple neck. Not sure what's the body made of but it's godamn heavy). The electronics are kinda equivalent to the Mexican electronics, but sound way different. My aunt had it since i was a kid and I asked for it when I was around 15. It's my first guitar that I decided to make projects on it and add some more value to it. Link to comment Share on other sites More sharing options...
Moderators daddymack Posted January 25, 2021 Moderators Share Posted January 25, 2021 I thought so, its a Condor! Actually a Yasuki Condor. Rare in the USA, but a well made made Japanese beast. Not much info out there on these... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.