Jump to content

Tight Solder Spot,, Help Needed,,,,🤔


Recommended Posts

  • Members

Good day & hope all are well~ If you check out my picture, you'll see those 3 dip switches, & the 2 end switches need to be replaced, but my technician can't get in between those 2 green wafers to unsolder the bottoms of the switches, and the wafers don't easily separate. Who locally could I turn to to help tackle this tricky job,,, a jeweler, a blacksmith 🤔,,, any thoughts?
Thanks so much in advance for your help~
Stay well~
Kenny

Screenshot_20200910-125204_Gallery.jpg

Link to post
Share on other sites
  • Members

Take the 2 boards apart. Sometimes taking things apart is 90% of the job. Well 45% of the job, getting it back together can be the other 45%.

You're not getting in there with any soldering iron, and I use a Wellar Digital workstation for my soldering.

 

 

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...