Members eyobeez Posted April 6, 2017 Members Share Posted April 6, 2017 Hey all, I have a Boss DD-7, and I recently purchased a Saturnworks micro tap tempo pedal to work with it. What kind of cable should I be using to connect the tap tempo to the delay unit? The manual doesn't specify whether it should be a TRS cable or a regular ol' patch cord; it only reads "connect with a 1/4" phone plug." Should I run to the store and buy a TRS cable, or am I okay to use a 1/4" patch cord? Thanks for reading! --E Link to comment Share on other sites More sharing options...
Moderators daddymack Posted April 7, 2017 Moderators Share Posted April 7, 2017 just a short patch cord...FYI a TRS cable is a 1/4"...stereo... Link to comment Share on other sites More sharing options...
Members jorhay1 Posted April 9, 2017 Members Share Posted April 9, 2017 Standard 1/4" (TS) guitar cable. You don't need a TRS. Link to comment Share on other sites More sharing options...
Phil O'Keefe Posted April 10, 2017 Share Posted April 10, 2017 Yup - a regular TS (tip / sleeve) 1/4" "guitar cable" will work fine. A TRS (tip / ring / sleeve) or "stereo" cable isn't needed in this case, and might not even work properly if you tried to use one. Link to comment Share on other sites More sharing options...
Members eyobeez Posted April 16, 2017 Author Members Share Posted April 16, 2017 Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.