Jump to content

Korg Pitchblack - not working :( - Help?


FoonkySteve

Recommended Posts

  • Members

Howdy!

 

I got a pitch black, i bought it used about 6 -7 months ago, has worked perfectly from then, ....... until now :(

 

I use the 9v power supply. Basically i plug it in activate the tuner, it lights up and works for a few seconds then does not respond to anything. Cables have been checked and are fine.

 

Any ideas?

 

If it's dead there's not much i can do, other than buy a new tuner.

Link to comment
Share on other sites

  • Members

If the cables are fine then I would check if the pedal works with a battery. If it doesn't work with a battery then I would check how long the manufacturers warranty lasts for. Even if the warranty has expired, take it back to where you bought it and see what they say.

Good luck.

Link to comment
Share on other sites

  • Members

be sure that the power supply input is connected to the power supply input socket and not to the output where a daisy chain should power other pedals...

had this once or twice when recableling my pedal board *facepalm*
:)

 

Ha ha, yeah i checked that, an I have done that before too :thu:

 

 

 

Thanks for your time time guys, and the responses. Much appreciated :thu:

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...