Members Woody_in_MN Posted May 21, 2009 Members Share Posted May 21, 2009 I have a SG Faded. I re-stained the body and I want a little more gloss from the finish, but don't want to poly coat it - that is too much gloss. It seems like I remember a product that is out there that will add a little more gloss to a natural finish. Can someone help me out with what product is out there that would work? Thanks, - W Link to comment Share on other sites More sharing options...
Members newbuilder Posted May 21, 2009 Members Share Posted May 21, 2009 I have heard alot of people talk about wipe on poly and I think that would be a good way to add gloss without over shooting it. Link to comment Share on other sites More sharing options...
Members Funderbunk Posted May 21, 2009 Members Share Posted May 21, 2009 Wipe on a layer of Tru Oil, perhaps? Link to comment Share on other sites More sharing options...
Members Woody_in_MN Posted May 22, 2009 Author Members Share Posted May 22, 2009 I think I was originally trying to think of Tung Oil. I will do a test later tonight. My wifey also says Lindseed Oil. - w Link to comment Share on other sites More sharing options...
Members mrbrown49 Posted May 22, 2009 Members Share Posted May 22, 2009 I think I was originally trying to think of Tung Oil. I will do a test later tonight. My wifey also says Lindseed Oil. - w Tru oil will work better than either of those. Link to comment Share on other sites More sharing options...
Members Elias Graves Posted May 22, 2009 Members Share Posted May 22, 2009 Tung oil will give you a harder finish you can polish. EG Link to comment Share on other sites More sharing options...
Members Doctor Morbius Posted May 22, 2009 Members Share Posted May 22, 2009 There's satin wipe-on poly from MinWax. Link to comment Share on other sites More sharing options...
Members Woody_in_MN Posted May 22, 2009 Author Members Share Posted May 22, 2009 Guys, Thanks for all the good replies. - w Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.