Members hosebeast Posted January 28, 2011 Members Share Posted January 28, 2011 just bought a sunn model t from a fellow HCFX user and he says the light goes in and out. assuming it's an old bulb, how hard are they to change? i had the same problem with my twin, but never took the time to mess with it. Link to comment Share on other sites More sharing options...
Members ambient Posted January 28, 2011 Members Share Posted January 28, 2011 If you need to ask, take it to a tech. Link to comment Share on other sites More sharing options...
Members RoboPimp Posted January 28, 2011 Members Share Posted January 28, 2011 anywhere between painfully easy to painfully dead Link to comment Share on other sites More sharing options...
Members boytbpc Posted January 28, 2011 Members Share Posted January 28, 2011 If it is the type that the metal housing around the light unscrew (kind of like a flashlight) it takes a few seconds, if it is not that type Link to comment Share on other sites More sharing options...
Members Mr.Grumpy Posted January 28, 2011 Members Share Posted January 28, 2011 If it's the kind with the light built into the switch itself, you'll have to replace the whole switch. It's a neon bulb, and since they last almost forever, they are usually soldered in and aren't intended to be replaceable. Link to comment Share on other sites More sharing options...
Members hosebeast Posted January 29, 2011 Author Members Share Posted January 29, 2011 so you guys are saying that it's probably a short somewhere else, and not just a simple popping out of a bulb? well, that kind of sucks. Link to comment Share on other sites More sharing options...
Members conky Posted January 29, 2011 Members Share Posted January 29, 2011 Post a pic of it. Link to comment Share on other sites More sharing options...
Members melx Posted January 29, 2011 Members Share Posted January 29, 2011 so you guys are saying that it's probably a short somewhere else, and not just a simple popping out of a bulb? well, that kind of sucks. I would say so, bulbs tend to either work or not.. good or blown. Cutting in and out sounds like something loose. Link to comment Share on other sites More sharing options...
Members andreas Posted January 29, 2011 Members Share Posted January 29, 2011 The modern model T (dual channel) seems to have the standard light bulb/coloured lens arrangement as most Fenders etc. In that case, just unscrew the lens and pop the lamp out (push and twist). On the older model T amps, the light seems to be enclosed in the power switch, so you'd have to replace that, which is a fair bit harder. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.