Members Crisco Posted November 29, 2010 Members Share Posted November 29, 2010 I was thinking of getting one to bang or mod on so I just wanted to know who had an LP copy or other that they thought was either good or bad and why! I like the Douglas Shadow Pro CSBhttp://www.rondomusic.com/shadowpro.html But for the same price the SX Calisto puts it to shame I think:http://www.rondomusic.com/callistocustwr.html Link to comment Share on other sites More sharing options...
Members pak066 Posted November 29, 2010 Members Share Posted November 29, 2010 never played either but i have heard good things about both companies. i would get the SX though because the Douglas is FUGLY!!!! that clown burst is horrendous!! Link to comment Share on other sites More sharing options...
Members troyguitar Posted November 29, 2010 Members Share Posted November 29, 2010 Spend the tiny bit more for an Agile AL-2000, trust me I've had both. Link to comment Share on other sites More sharing options...
Members dabbler Posted November 29, 2010 Members Share Posted November 29, 2010 I hesitate to respond to questions like this mainly because I am obviously in the minority here. Anyways, I have never had the Douglas model you are looking at, but my experiences with the SXes, Douglases and Agiles that I have had tell me: 1. If you like chunky necks try the SX. I actually had the SX you are looking at, except back then it was called the GG1 and had a pointed horn. I LOVED that guitar, but after I bought a few more LP style guits it became redundant. This is the one I would choose, because the neck is chunky and MAHOGANY. I have Mahogany-necked and Maple-necked LP style guits, and for me if I'm gonna have a mahogany body, I like the tone better from a mahogany neck. 2. They quality on Douglases is generally better than SX, excluding the pups. 3. Quality on the Agiles is generally better than the Douglas (including the pups), but you can replace the tuners on an SX (worst part of SXes, but they work fine, you just have to turn them 20 times or so with a string winder to work out the areas where they bind) with a set from from GF, that are smoother (even lockers) and still come out cheaper than the Agile. If you go up to the Agile AL-3000 level you won't have to replace anything, IMO, but only you can decide if you want a serious player straight out of t I'm a roll-your-own kind of guy, so while I have Agiles too, I play my SXes more (most are modded). You should also be aware that chunky necks do affect tone, IMO. The chunky neck SXes have a slight mid honk that I like too (I like chunky necks) but some don't. I have never bought a "bad" LP style guit from Rondo, and in every csiwyg=0 Link to comment Share on other sites More sharing options...
Members humbuckerstrat Posted November 29, 2010 Members Share Posted November 29, 2010 I like this Douglas Link to comment Share on other sites More sharing options...
Members Crisco Posted November 29, 2010 Author Members Share Posted November 29, 2010 I hesitate to respond to questions like this mainly because I am obviously in the minority here. Anyways, I have never had the Douglas model you are looking at, but my experiences with the SXes, Douglases and Agiles that I have had tell me:1. If you like chunky necks try the SX. I actually had the SX you are looking at, except back then it was called the GG1 and had a pointed horn. I LOVED that guitar, but after I bought a few more LP style guits it became redundant. This is the one I would choose, because the neck is chunky and MAHOGANY. I have Mahogany-necked and Maple-necked LP style guits, and for me if I'm gonna have a mahogany body, I like the tone better from a mahogany neck.2. They quality on Douglases is generally better than SX, excluding the pups.3. Quality on the Agiles is generally better than the Douglas (including the pups), but you can replace the tuners on an SX (worst part of SXes, but they work fine, you just have to turn them 20 times or so with a string winder to work out the areas where they bind) with a set from from GF, that are smoother (even lockers) and still come out cheaper than the Agile. If you go up to the Agile AL-3000 level you won't have to replace anything, IMO, but only you can decide if you want a serious player straight out of tI'm a roll-your-own kind of guy, so while I have Agiles too, I play my SXes more (most are modded). You should also be aware that chunky necks do affect tone, IMO. The chunky neck SXes have a slight mid honk that I like too (I like chunky necks) but some don't. I have never bought a "bad" LP style guit from Rondo, and in every csiwyg=0 Thank u for the input it helps out alot! Link to comment Share on other sites More sharing options...
Members Critical Ninja Posted November 29, 2010 Members Share Posted November 29, 2010 Spend the tiny bit more for an Agile AL-2000, trust me I've had both. +1...look at the price of this AL-2000, it's an incredible buy at this price! http://www.rondomusic.com/al2000black.html Link to comment Share on other sites More sharing options...
Members jrfan Posted November 29, 2010 Members Share Posted November 29, 2010 +1...look at the price of this AL-2000, it's an incredible buy at this price!http://www.rondomusic.com/al2000black.html Having had an al2000 it's excellent for the money. Link to comment Share on other sites More sharing options...
Members EllenGtrGrl Posted November 29, 2010 Members Share Posted November 29, 2010 I like this Douglas The 7-string version (the Douglas SR-370), has become quite popular with players looking for a decent, low cost 7-string. Link to comment Share on other sites More sharing options...
Members fu2jobu Posted November 29, 2010 Members Share Posted November 29, 2010 If you go up to the Agile AL-3000 level you won't have to replace anything, IMO, but only you can decide if you want a serious player straight out of t My dilemma is I would like to go with a Single Binding version. The AL-2900 which had single binding and upgraded pickups has been discontinued. The model that replaces it is triple bound. Do you have any insight into how the AL-2000 pickups are going to compare to the Burstbucker Pro's in a Gibson LP Faded? I don't mind paying the extra $$ for the AL-3000+ series but will need to get myself past the looks of the triple binding. Link to comment Share on other sites More sharing options...
Members humbuckerstrat Posted November 29, 2010 Members Share Posted November 29, 2010 The 7-string version (the Douglas SR-370), has become quite popular with players looking for a decent, low cost 7-string. Yeah, Rondo has quite the selection of 7 and 8 string guitars. Link to comment Share on other sites More sharing options...
Members Critical Ninja Posted November 29, 2010 Members Share Posted November 29, 2010 My dilemma is I would like to go with a Single Binding version. The AL-2900 which had single binding and upgraded pickups has been discontinued. The model that replaces it is triple bound. Do you have any insight into how the AL-2000 pickups are going to compare to the Burstbucker Pro's in a Gibson LP Faded? I don't mind paying the extra $$ for the AL-3000+ series but will need to get myself past the looks of the triple binding. Buy that AL-2000 that I linked earlier, buy a set of BB Pro's, a case, and you still come out cheap. Link to comment Share on other sites More sharing options...
Members fu2jobu Posted November 29, 2010 Members Share Posted November 29, 2010 Buy that AL-2000 that I linked earlier, buy a set of BB Pro's, a case, and you still come out cheap. True, but at that point I might get past the looks of triple binding for the nominal increase in price. Link to comment Share on other sites More sharing options...
Members zantor9 Posted November 29, 2010 Members Share Posted November 29, 2010 Yeah, Rondo has quite the selection of 7 and 8 string guitars. Thanks a lot humbuckerstrat Now i'm gassing for that neck thru, floyd rose, HSH Douglas Link to comment Share on other sites More sharing options...
Members lincoln40 Posted November 29, 2010 Members Share Posted November 29, 2010 zantor9 plays an orange Douglas, ask his opinion Link to comment Share on other sites More sharing options...
Members HELSTRUME Posted November 29, 2010 Members Share Posted November 29, 2010 I had a douglas, and it sounded horrible. But I could have gotten a bad guitar. I just sent it back, and didn't trade. Link to comment Share on other sites More sharing options...
Members troyguitar Posted November 29, 2010 Members Share Posted November 29, 2010 The AL-2000 comes with hot and rather muddy IMO ceramic pickups which I would consider replacing straight away. Same goes for the Douglas and SX versions though too, at least the ones I've owned which were all a few years ago. It's possible they've changed the stock pickups in any or all of them by now. Link to comment Share on other sites More sharing options...
Members IBDBB Posted November 29, 2010 Members Share Posted November 29, 2010 Douglas are made by Saien/Shine guitars. Decent quality, but if you are spending close to $200, just get an Agile. Link to comment Share on other sites More sharing options...
Members lincoln40 Posted November 29, 2010 Members Share Posted November 29, 2010 Douglas are made by Saien/Shine guitars. Decent quality, but if you are spending close to $200, just get an Agile. Instead of FR-Agile how about ESP or Ibanez Link to comment Share on other sites More sharing options...
Members humbuckerstrat Posted November 30, 2010 Members Share Posted November 30, 2010 Thanks a lot humbuckerstrat Now i'm gassing for that neck thru, floyd rose, HSH Douglas Sorry about that, Zantor But isn't that what HCEG is all about? :poke: Link to comment Share on other sites More sharing options...
Members Kevman Posted November 30, 2010 Members Share Posted November 30, 2010 Instead of FR-Agile how about ESP or Ibanez Because the OP did not ask about ESP or Ibanez you toolbag.Why have you run with the idiotic FR-Agile thing? Have you ever even touched one of these guitars?Toss off Troll. To the OP: I have one of the older SX GG1 LPs (as well as many other SX models) and its a pickup testbed for me now. I like it, sounds very chambered but it is because if the plywood top. There is actually space between the mahogany back and the "bent" top. I don't look at this as a detracting feature, I knew I wasn't buying a Mahog/Maple Gibson and the "hollowness" is cool sounding. Neck is great. I have a few Douglas guitars as well and agree that they are generally a little nicer than similar SX options usually int the binding/finish work dept. The Douglas semi-hollow I have came with Grovers for example and has a nice heavy duty Gibson style 3 way switch as opposed to the little box switches you'll find in SX guitars. My Agiles (I have several) Are better on every level. The 2000 and 2500 series' ceramic pups are not bad IMO and I have replaced some and kept others. I haven't replaced any because they suck, just looking for different tones. I have described the ceramics as being like a super distortion with a little less output. They like to have some room between them and the strings though or they can sound muddy. I keep mine adjusted pretty low. So to answer your question, I still GAS over Douglas guitars but usually only when there is not an Agile that fills the same need available. Currently I am gassing for a Douglas SpadPro. Damn. Link to comment Share on other sites More sharing options...
Members A_Gitarman Posted November 30, 2010 Members Share Posted November 30, 2010 To the OP: I have one of the older SX GG1 LPs (as well as many other SX models) and its a pickup testbed for me now. I like it, sounds very chambered but it is because if the plywood top. There is actually space between the mahogany back and the "bent" top. I don't look at this as a detracting feature, I knew I wasn't buying a Mahog/Maple Gibson and the "hollowness" is cool sounding. Neck is great. I have a few Douglas guitars as well and agree that they are generally a little nicer than similar SX options usually int the binding/finish work dept. The Douglas semi-hollow I have came with Grovers for example and has a nice heavy duty Gibson style 3 way switch as opposed to the little box switches you'll find in SX guitars. My Agiles (I have several) Are better on every level. The 2000 and 2500 series' ceramic pups are not bad IMO and I have replaced some and kept others. I haven't replaced any because they suck, just looking for different tones. I have described the ceramics as being like a super distortion with a little less output. They like to have some room between them and the strings though or they can sound muddy. I keep mine adjusted pretty low. So to answer your question, I still GAS over Douglas guitars but usually only when there is not an Agile that fills the same need available. Currently I am gassing for a Douglas SpadPro. Damn. I've also found that the Douglas guitars usually have a little better fit/finish than the SX's. That being said, 2 of my 3 Douglas's needed a good bit of tweaking (truss rod, string height, intonation, fretwork, etc) to get them up to par. Both of them have since found their way into my regular rotation, however (the third one was a birthday gift to my nephew): Link to comment Share on other sites More sharing options...
Members IBDBB Posted November 30, 2010 Members Share Posted November 30, 2010 i love this place If you are going to quote me, lincoln40, at least quote me correctly. About SX and Agile:Quote:Originally Posted by IBDBB OP:some people do expect $1k quality from them, that just aint gonna happen. I said this about SX, not Agile. Link to comment Share on other sites More sharing options...
Members zantor9 Posted November 30, 2010 Members Share Posted November 30, 2010 Sorry about that, Zantor But isn't that what HCEG is all about? :poke: haha i guess so but that is one nice guitar for the price Link to comment Share on other sites More sharing options...
Members Arr0wHead Posted November 30, 2010 Members Share Posted November 30, 2010 Instead of FR-Agile how about ESP or Ibanez The DOUGLAS guitars are built by Saein, the same company that makes a great deal of those Ibanez guitars already. In a room with selections ranging from a vintage Gibson worth more than my car to a crappy Starfire I bought off ebay for $50, (with a dozen varying instruments in-between) I find lately that my $189 Douglas WRL590 is my go to guitar more often than not. So show me the Ibanez or ESP option where you get a neck through body mahogany body with licensed floyd for under $200. And for the record, I've tried a few of the left handed models of both, and the licensed trem on the douglas/agile guitars is far better to me than the ESP floyd or Ibanez trem. (on the inexpensive models. I have ZERO experience with top shelf ESP and IBANEZ since neither makes a left handed model that I've ever had opportunity to play.) The douglas pickups are usually a generic ceramic pickup. They're not horrible, but as a chronic modder I replaced them immediately with a set of PUPS from GFS. Figure another $80 invested right there, so that $200 guitar ends up close to 3. That said, I also swap pickups in more expensive and name brand models too (including the Gibson), so it might not be completely necessary for everyone. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.