Members samzadgan Posted May 2, 2012 Members Share Posted May 2, 2012 You need a guitar with a long scale length (eg 25" +) for down tuned metal. when I say down tune, I'm talking tuning to C or B or Drop B etc. Up until yesterday i believe one thing was fact...but from some feedback, I'm starting to doubt it...so right now, I'm really confused! Link to comment Share on other sites More sharing options...
Members Athiest_Peace Posted May 2, 2012 Members Share Posted May 2, 2012 Myth. Godsmack plays a lot in C, yet they play LP's with the shorter scale. Link to comment Share on other sites More sharing options...
Members WRGKMC Posted May 2, 2012 Members Share Posted May 2, 2012 All you need is large core strings and you can down tune any guitar. http://www.juststrings.com/ghselectricguitarbigcore.htmlthe strings are designed to be tuned lower and wont be so flabby bacause thecore wires of the wound strings are thicker.You do have to set a guitar up for thicker diameter strings which means cutting the nut, saddles depending on the bridge type, setting up the trussand reintonating the instrument. Still better off just buying a baratone guitar though. Link to comment Share on other sites More sharing options...
Members samzadgan Posted May 2, 2012 Author Members Share Posted May 2, 2012 All you need is large core strings and you can down tune any guitar. http://www.juststrings.com/ghselectricguitarbigcore.htmlthe strings are designed to be tuned lower and wont be so flabby bacause thecore wires of the wound strings are thicker.You do have to set a guitar up for thicker diameter strings which means cutting the nut, saddles depending on the bridge type, setting up the trussand reintonating the instrument. Still better off just buying a baratone guitar though. So basically your saying its a Myth, but its better to have a baratone...? Link to comment Share on other sites More sharing options...
Members Marc G Posted May 2, 2012 Members Share Posted May 2, 2012 So basically your saying its a Myth, but its better to have a baratone...? I think he's saying it's possible....but easier if you just go with an instrument that's designed to be to tuned that low.... Link to comment Share on other sites More sharing options...
Members Spike Li Posted May 2, 2012 Members Share Posted May 2, 2012 Myth. Brendon Small of Dethklok fame plays explorers and LPs and he tunes down to C standard Amon Amarth play explorers and Im pretty sure they tune to C standard too. Theres a Foo Fighters song- Stacked Actors - which is played in drop A on gibson scale guitars. Link to comment Share on other sites More sharing options...
Members EllenGtrGrl Posted May 2, 2012 Members Share Posted May 2, 2012 You can play lower tunings with shorter scale instruments (many people don't realize that Glenn Campbell played the solo on "Wichita Lineman", with a Fender Jaguar [which has a 24" scale neck] tuned down to C, instead of a Baritone). I keep my Danelectro MOD 7, 7-string tuned to Drop Ab, and its scale length is 25". Gibson's 7-strings (which they make on occasion) have 24.75" scale lengths. Heavier strings do help to alleviate loose tension/floppy feel. But past a certain point, larger diameter strings can become problematic due issues with getting guitars with shorter scale necks to intonate properly (mainly when tuned below A). This is why many 7-string guitars, and most 8-string guitars have scale lengths longer than 25.5" Besides benefitting intonation in the lower tunings, longer scale lengths allow you to use lighter gauge strings (due to the increased tension), which may be preferrable feel-wise to heavy gauge strings. But, there is also a downside - the higher strings can often feel too stiff, and (especially if you play high up the neck) sound kind of screechy, due to the increased string tension (I used to have to deal with this issue on the Schecter Omen Extreme 7 I had, due to its 26.5" scale length). This is why some players play 7 and 8-string guitars, with fanned frets. You can set up the frets to give shorter scale lengths (with less string tension) on the high strings, while having longer scale lengths on the lower strings (where you want to avoid using super-heavy strings, but still have decent string tension). But, in a nutshell, unless you're going to uber low tunings (a and lower), scale length will end up being a preference thing. Link to comment Share on other sites More sharing options...
Members nightflameauto Posted May 2, 2012 Members Share Posted May 2, 2012 Myth. I have a 25.5" 8 string that's been tuned to drop E a few times. That would be the equivalent note to the low E on a bass guitar. I also tune C standard on a 24.75" scale guitar. The biggest problem I've found with just increasing the core or the overall gauge of the strings until it feels right is you tend to get a deeper tone the bigger the string. At a certain point that CAN be a problem, depending on what sort of tone you're going for. People in metal tend to go for brighter, higher focused tones and worry about mush-out on the lower strings if the strings get too big. Cleans or less heavily distorted/overdriven tones can sound really big and fat with bigger gauges though. It's all about what you want to do with it. Link to comment Share on other sites More sharing options...
Members samzadgan Posted May 2, 2012 Author Members Share Posted May 2, 2012 It's all about what you want to do with it. Thank you all for your advice...on the question above...I basically want to use this guitar for Stoner/Drone type metal. The story basically is, i have a squier strat that i don't use, and i was going to change up the PUPs to 1 humbucker or a P90, and get the nut fixed so i can put on heavy gauge string (in the range of 50-60's)...but then the guy at the guitar shop talked me out of it and said i need a mahogony body guitar, mahogony neck...and long scale neck etc...but given that he pointed me in the direction of a guitar he had in the shop, i got a bit suspicious as to his motives. I dont doubt that the wood of the guitar makes a difference, and the set neck would help also, but i could probably pickup a second hand LP or SG much cheaper than the guitar his talking about...which then lead me to asking the question on this thread! Link to comment Share on other sites More sharing options...
Members EllenGtrGrl Posted May 2, 2012 Members Share Posted May 2, 2012 Thank you all for your advice...on the question above...I basically want to use this guitar for Stoner/Drone type metal.The story basically is, i have a squier strat that i don't use, and i was going to change up the PUPs to 1 humbucker or a P90, and get the nut fixed so i can put on heavy gauge string (in the range of 50-60's)...but then the guy at the guitar shop talked me out of it and said i need a mahogony body guitar, mahogony neck...and long scale neck etc...but given that he pointed me in the direction of a guitar he had in the shop, i got a bit suspicious as to his motives. I dont doubt that the wood of the guitar makes a difference, and the set neck would help also, but i could probably pickup a second hand LP or SG much cheaper than the guitar his talking about...which then lead me to asking the question on this thread! Nah, it'll be fine for that. You may not get that classic Stoner Rock/Metal SG tone, but other than that, it'll play just fine, as long as you set it up properly. Link to comment Share on other sites More sharing options...
Members nightflameauto Posted May 2, 2012 Members Share Posted May 2, 2012 Stoner/doom you sort of want the softer, fatter low end of heavy gauge strings anyway. Most of those folks use shorter scales tuned way down. You should be fine. Link to comment Share on other sites More sharing options...
Members samzadgan Posted May 2, 2012 Author Members Share Posted May 2, 2012 Nah, it'll be fine for that. You may not get that classic Stenor Metal SG tone, but other than that, it'll play just fine, as long as you set it up properly. Cool...because I have put my squier up for sale...with the view of buying the guitar in the shop. But i really want the LTD Viper 256 Vintage, and it should fit the bill then Link to comment Share on other sites More sharing options...
Members Help!I'maRock! Posted May 2, 2012 Members Share Posted May 2, 2012 myth, myth. Link to comment Share on other sites More sharing options...
Members samzadgan Posted May 4, 2012 Author Members Share Posted May 4, 2012 anyone else want to weigh in here?...so far seems like its Myth... Link to comment Share on other sites More sharing options...
Members LesPaulFetish Posted May 4, 2012 Members Share Posted May 4, 2012 I wouldn't say "need" but it would obviously help maintain higher tension if that's what you want. If you set up your Squier for the job it should do fine with thicker strings. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.