Jump to content

Let's play NAME THAT AMP


mamberg

Recommended Posts

  • Members
Peter's somethingorother?



no Peter involved...........


last clue is a description:

Top-notch components, point-to-point handwired, all tube 18-watter. Not just a one-trick pony, this amp was made to do the Marshall 18-watter tone plus the later 1959/JMP tone. On the front panel, using the "tone/eq" switch, in the "Tone" position, the bass control becomes the single tone, as with a Marshall 18 - in the other position it becomes a Marshall JMP with the JMP tone stack and all tone controls in the circuit. On the back there is a Pub/Club switch which changes from a fixed to cathode bias, producing higher output in the Club setting. He also added a Grid H/Lo into the power amp to make it schematically correct depending for both the JTM and JMP. There is also a bias pot easily accessible on the top of the chassis. Other features include cool light-up panel, compartment for cord storage, and glides on the bottom to attach to cabinet. This is no longer made but would be around $2K if you want to get one made. This one has never been roaded and is in clean shape, sounds as killer as any Marshall clone I've had, and is a nice price on a hand-wired at just $1299.


I'm not the one sellin' it...........or buyin' it :(

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...