Members Zozobra Posted October 13, 2010 Members Share Posted October 13, 2010 Its just a thought at the minute. I'd have to work out the switching but it would be something like this:A bunch of loops with relays which either engage the loop or leave them bypassed.A bunch of foot switches that engage selected loops.A dip switch for each foot switch to determine which loops get engaged when the foot switch is activated. To activate a relay all you need to do is put a voltage across it so each one has the activation voltage supplied to it. Its then switched by connecting the ground. The ground made by the footswitch and the ground to each loop is further be made or broken with a dip switch, thus selecting what gets engaged or not when the footswitch is activated. Theres a little more to it than that but I havent even sketched this out so I havent gone over the finer details. Link to comment Share on other sites More sharing options...
Members Dolf Posted October 13, 2010 Members Share Posted October 13, 2010 loop. Link to comment Share on other sites More sharing options...
Members yourguitarhero Posted October 13, 2010 Members Share Posted October 13, 2010 An alternative is to use the double ended 1/4" jack plugs (audio double ended dildos) to get the pedals next to each other and turn your foot sideways. Or just double footed jump onto them, that's what I used to do anyway. Link to comment Share on other sites More sharing options...
Members Dolf Posted October 13, 2010 Members Share Posted October 13, 2010 If you need multiple loops, this is about the most user-friendly solution you can buy: http://www.carlmartin.com/product%20octaswitch.htm Link to comment Share on other sites More sharing options...
Members Zozobra Posted October 13, 2010 Members Share Posted October 13, 2010 Ah ha so it does exist. I guess the circuit is fairly simple. You do need 2 dpdt relays per loop though if you want true bypass so it gets expensive quick. I'd have to think about making the footswitching non-collisional though. Link to comment Share on other sites More sharing options...
Members Zozobra Posted October 13, 2010 Members Share Posted October 13, 2010 http://www.geofex.com/article_folders/fxswitchr/fxswitchr.htm looks fairly neat if you dont mind a bit of soldering and working a few things out for yourself. Link to comment Share on other sites More sharing options...
Members isvoid Posted October 13, 2010 Members Share Posted October 13, 2010 If you need multiple loops, this is about the most user-friendly solution you can buy: http://www.carlmartin.com/product%20octaswitch.htmI thought I read those were prone to noise. Goes a searchin' ... Link to comment Share on other sites More sharing options...
Members brenuelt Posted October 13, 2010 Members Share Posted October 13, 2010 Wouldn't it be better to outgrow a Link to comment Share on other sites More sharing options...
Members jnurp Posted October 13, 2010 Members Share Posted October 13, 2010 Carl Martin Octaswitch, that thing is awesome, very expensive but friggin awesome. Link to comment Share on other sites More sharing options...
Members FastRedPonyCar Posted October 13, 2010 Members Share Posted October 13, 2010 What you want is a box called a "true-bypass looper". There are a number of companies that make them, but the one that comes to mind is Loop Master/. Basically, it will let you patch a couple of pedals into them, and the TB looper will allow you to bypass all the activated pedals in that separate loop. This is the simplest way to do this. The complicated ways would be to have a midi setup. Huge +1 to this. I have a loop master single button/led loop switch box and it works GREAT for engaging multiple pedals with 1 click. I've used it with the JTM45 to have 2 different OD pedals on cascading into each other and then use the loop switch to engage/disengage both at once with 1 click by essentially allowing them into the main signal. Very efficient but the build time for the loop master stuff is over the top IMO. You get the whole "high quality products and won't be hurried through on the build, etc..." blah blah blah... Good pedal though but I don't know if I'd order from them again unless I needed something specific simply due to the build time. Link to comment Share on other sites More sharing options...
Members mhr74 Posted October 13, 2010 Members Share Posted October 13, 2010 No, we're not mormons, that's illegal in the US LAWL Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.