Members liko Posted April 7, 2008 Members Share Posted April 7, 2008 Currently my only acoustic is my "beater"; a $100 Takamine Jasmine. It's a fun little guitar with pretty good sound, but I'm getting good enough to see where they skimped (tuners, board and frets mostly), so I'm thinking my next purchase will be an acoustic guitar I can really grow into. I went to a local GC and found a rather thin 000. It didn't look like much hanging on the wall, but when I took it down I noticed something rather odd; I play bass too, and have seen 3, 5 and even 7-piece necks, but this thing blew 'em all away; a veritable sub sandwich of mahogany strips. Apparently such a neck will never warp, without totally sacrificing tone. I played it, and was very impressed by the feel; it was a very comfortable guitar, very smooth under the fingers, and had a pretty good sound. I prefer the bare-wood type feel of the satin finishes; lacquered instruments, even the expensive ones, look cheap to me. All that, and it was only $700 for the Fishman-equipped model, and it's a USA Martin; the sales guy and I both went over the instrument with a fine tooth comb for any mention of "assembled in Mexico" and couldn't find it, and the label in the soundhole stated "Made In USA" quite plainly. The one thing I'm kind of dubious about is the unamped volume. I compared it to some higher-priced Martin 000s including a Clapton LE (the one where only 250 were made, personally signed by Clapton) and it doesn't hang with the big boys, but strum a G and it will fill the room. I didn't have the chance to A/B it against similarly-priced models. Anyone else have any comments about these? They definitely seem a very solid, serviceable intermediate-level guitar, but I really need to know if it will make itself heard alongside two or even three other guitars without needing an amp. I didn't listen to it amped, but Fishman and LR Baggs are the two names I trust in piezos, and for a $200 upcharge over the non-piezo model it can't be a terrible system. It's just that at $700, you're starting to get into the realm where that instrument would be my go-to, and as such it better be something I cannot find fault with. Link to comment Share on other sites More sharing options...
Members Freeman Keller Posted April 7, 2008 Members Share Posted April 7, 2008 , but this thing blew 'em all away; a veritable sub sandwich of mahogany strips. Apparently such a neck will never warp, without totally sacrificing tone. I have no experience with that particular guitar but I want to correct two miss statements here. First, the neck not mahogany unless is it is somehow a laminate of mahogany strips. On their web site Martin says the neck is "Rust Stratabond Link to comment Share on other sites More sharing options...
Members Crab_Cake Posted April 7, 2008 Members Share Posted April 7, 2008 Martin Guitar has long recognized the serious nature of the earth's dwindling resources and has focused attention on alternative materials. We are also committed to designing Martin guitars that are within reach of every aspiring guitarist. Martin's breakthrough X Series guitars were designed to meet both of these needs! The X Series guitars are constructed with a combination of highly compressed wood fibers (high-pressure laminate, abbreviated as HPL) and traditional tonewoods. Martin has found HPL to be an extremely durable and workable material. We have crafted ways to build traditional Martin shapes with HPL that yield incredibly long-lasting, affordable guitars. Most importantly, we've managed to build them so they possess the "famous" Martin sound and playability found in our more expensive guitars.Features:Model 000X1Construction: Mortise/Tenon Neck JointBody Size: 000-14 FretTop: Solid Sitka SpruceRosette: Inlaid Boltaron W/ Red Fiber/ Multiple Black/White/BlackTop Bracing Pattern: 000-1 (A - Frame)Top Braces: 000-1 (A - Frame)Back Material: Mahogany Pattern Hpl Textured FinishBack Purfling: NoneSide Material: Mahogany Pattern Hpl Textured FinishEndpiece: NoneEndpiece Inlay: NoneBinding: NoneTop Inlay Style: NoneSide Inlay: NoneBack Inlay: NoneNeck Material: Rust StratabondNeck Shape: Modified Low OvalNut Material: White CorianHeadstock: Solid/6 String No Diamond/Standard TaperHeadplate: Mahogany Pattern Hpl W/ Printed Logo /Raised Gold Foil LogoHeelcap: NoneFingerboard Material: MoradoScale Length: 25.4''# Of Frets Clear: 14# Of Frets Total: 20Fingerboard Width At Nut: 1 11/16''Fingerboard Width At 12th Fret: 2 1/8''Fingerboard Position Inlays: NoneFingerboard Binding: NoneFinish Back & Sides: NoneFinish Top: Hand Rubbed FinishFinish Neck: NoneBridge Material: MoradoBridge Style: 1 Style BellyBridge String Spacing: 2 1/8''Saddle: Compensated White TusqTuning Machines: Chrome W/ Small KnobsRecommended Strings: Martin Msp 4100 Light Phosphor BronzeBridge & End Pins: White W/ Black DotsPickguard: I-01 Tortoise ColorCase: NoneInterior Label: Foil Label - 000x1 Solid Spruce TopElectronics: OptionalOther Options: Available Left-Handed At No Additional ChargeOther Comments: All Prices & Specifications Are Subject To Change Without Notice. I have never been a fan of the martin HPL back and sides, they take heat, pressure, glue, and sawdust to create them. My friend actually had an x series, but it broke very shortly after she bought it. But it was probably a lemon, If it sounds good to you then get it, but make sure you look at other non martin guitars. for $700 you could get a epiphone masterbilt AJ-500re, and that is 10 times the guitar a martin x series is. (sorry) But if it sings to you then by all means get it. Link to comment Share on other sites More sharing options...
Members FunkaGuitar Posted April 7, 2008 Members Share Posted April 7, 2008 +1 on the masterbilt, they are awesome for their price, that or seagull. Link to comment Share on other sites More sharing options...
Members Glenn F Posted April 7, 2008 Members Share Posted April 7, 2008 Or a Larrivee L-03 or something. Cheers, Glenn Link to comment Share on other sites More sharing options...
Members guitarist21 Posted April 7, 2008 Members Share Posted April 7, 2008 I really like the 000x1. By far, it is my favorite from the Martin X Series. Personally, in that price range I'd probably make a move on the aforementioned Epiphone Masterbilt or Larrivee but if you've played the Martin and you like it, that's worth more than my opinion. You said you're worried about the unplugged volume. The Epiphone Masterbilt series has some of the loudest guitars I've ever played, but louder isn't always better. Most times it's better to have a midrangy tone to cut through a mix than to just be loud- being loud can sometimes do nothing but muddy up the sound. That said, as a Masterbilt owner, I take a lot of solace in knowing that my acoustic has a lot of "headroom," and if I wanted I could probably out-strum a lot of guitars. Ellen Link to comment Share on other sites More sharing options...
Members JerseyGuy Posted April 7, 2008 Members Share Posted April 7, 2008 Definitely check out any of the Blueridge (X)3 or (XX)3 models -- the number 3 on the end of the model number denominates a OOO body style. Some have lam sides and back, the pricier ones are all solid. I A/B'd a 163 with the Martin Clapton model and apart from a slightly stronger low E on the Martin could not tell them apart. Also try the Parkwood 320M, an OM size, very sweet and balanced tone, sold only at GC. Link to comment Share on other sites More sharing options...
Members liko Posted April 8, 2008 Author Members Share Posted April 8, 2008 So the general consensus is in the $500-$700 range there are far better boxes out there. Fair enough. I have tried Breedlove, and was fairly impressed, but the ones I was most impressed with were out of my reach. Parkwood had really good build quality but just didn't call to me sound-wise. I've heard older Yammies are good, but what I've played of their new models leaves a bit to be desired. And I am quite simply not an Ovation guy, regardless of how much other people like them. I don't have much experience with L'Arrivee; I'll have to keep an eye out. I've heard they're excellent guitars; a guy who was A/Bing amps while I was checking out the Martin certainly held them in high regard. Never seen a Blue Ridge, so I'll keep my eyes peeled for one of those. Link to comment Share on other sites More sharing options...
Members kwakatak Posted April 8, 2008 Members Share Posted April 8, 2008 I can see where you'd think that the tone would fill a room, but I recently tried one and didn't care for it. For starters, it weighs a TON and compared to other Martins, the tone is not that good. Shop around. There have already been some good suggestions with Epiphone Masterbilt, Larrivee and even Martin 15 and 16 series. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.