Members garage_logician Posted February 26, 2008 Members Share Posted February 26, 2008 Is there an online vendor that would have Allen screws for a Tele saddle? I am looking to replace the current ones with some that are a little longer and would offer me more saddle adjustment. :-) Thanksg Link to comment Share on other sites More sharing options...
Members El Glom-o Posted February 26, 2008 Members Share Posted February 26, 2008 For any threaded hardware that you can't find locally, try Leonard Jed Co., in Baltimore. Link to comment Share on other sites More sharing options...
Members AshboneWish Posted February 26, 2008 Members Share Posted February 26, 2008 Ace hardware? Link to comment Share on other sites More sharing options...
Members lowbrow Posted February 26, 2008 Members Share Posted February 26, 2008 Looking at your photos from the other thread...and I'd love to see more overall shots and hear something about that kit...it looks like your screws are plenty long. They can run way down inside those saddles and be perfectly fine. Try that first....however, if it's a problem, try a good hardware store....they should be able to help you. Link to comment Share on other sites More sharing options...
Members maltomario Posted February 26, 2008 Members Share Posted February 26, 2008 mcmaster-carr is the best place to get any type of hardware (screws, bolts, etc)http://www.mcmastercarr.com Link to comment Share on other sites More sharing options...
Members cratz2 Posted February 26, 2008 Members Share Posted February 26, 2008 Locally, we have a few Sears Hardware-specific stores that have ENDLESS fasteners of all kinds. The Lowes and Home Depot stores only have a few black metric allen screws, but the Sears hardware store as about 80 different ones in all different lengths and thread sizes. Link to comment Share on other sites More sharing options...
Members 23miles Posted February 26, 2008 Members Share Posted February 26, 2008 Ace hardware? Good choice. Most real hardware stores will have a large selection of set screws. Link to comment Share on other sites More sharing options...
Members Procreatur Posted February 26, 2008 Members Share Posted February 26, 2008 no one will have them that small in my experience. i tried finding 3mm diameter screws for my p90's. had to order them online. hardware stores carry mostly SAE sizes, and the metric sizes don't go under 4mm usually. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.