Harmony Central Forums
No announcement yet.

Line6 and AT digital wireless


  • Time
  • Show
Clear All
new posts

  • Line6 and AT digital wireless

    Since both of these products operate on the same 2.4 band, does that mean they would interfere with each other if used together?

    A&H GL2800 console, BagEnd Crystals over D-18's, 12"and 15" BagEnd and EAW wedges powered and processed by QSC, Klark, BSS, Symetrix, Valley, Sabine, Peavey and BagEnd INFRA.

  • #2

    Possibly, depending on the channls used and any frequency changing protocols. Note that there are 2 different AT digital protocols, SpectraPulse is different.

    Former product development engineer: Genz Benz, a KMC Music/FMIC/JAM Industries Company, continuing factory level product support and service for Genz Benz

    Currently product development engineer: Mesa Boogie


    • RoadRanger
      RoadRanger commented
      Editing a comment

      Fortunately the newer iDevices all support 5 GHz so you don't have to share spectrum with these wireless 2.4GHz digital audio devices unless you have to support older iDevices. I know some guys have been letting the talent use their own older iPhones and iPod Touches to mix their own IEMs  .

  • #3

    Radios do not have to be on the same band to interfere with each other. Every radio transmitter  on the planet that is on is interfering with every other radio on the planet right now.  Whether or not it becomes a problem depends on a number of things.  Mostly relative power vs distance.


    I can only speak for the Line 6 units ... but interference never becomes audio in them.

    Don Boomer