Members marko46 Posted February 15, 2009 Members Share Posted February 15, 2009 Or an idiot, maybe a little of both. Anyway, Roland's manuals truly suck and are confusing and frustrating to me. I have a reverse cymbal sample I want to use, but it's on like a little delay when I strike the pad, plus the sample is longer than what I need. It becomes a real timing issue. for those of you who own an SPD-S, or understand them, does the unit have the ability to adjust the delay and length of the sample? If so, what do I need to do, in digital idiots terms please.Thanks,marko:thu: Link to comment Share on other sites More sharing options...
Members manoeuver Posted February 15, 2009 Members Share Posted February 15, 2009 I would use a manual psycho-electric adjustment of the pre-trigger musco-mechanical interface. that is to say, HIT IT SOONER. Link to comment Share on other sites More sharing options...
Members marko46 Posted February 15, 2009 Author Members Share Posted February 15, 2009 I would use a manual psycho-electric adjustment of the pre-trigger musco-mechanical interface.that is to say, HIT IT SOONER. I do already. But that's a bitch. Plus, in my experience, the sooner I've hit anything, the sooner that thing has become a problem. I'm attempting to avoid that. Link to comment Share on other sites More sharing options...
Members 1001gear Posted February 15, 2009 Members Share Posted February 15, 2009 If it's an actual reverse sample you'll just have to find the raw wave and edit it. Or import a new one. If it's a reverse effect you have a shot at editing the effect; probably in the reverbs list. Link to comment Share on other sites More sharing options...
Members MapexDrummer Posted February 16, 2009 Members Share Posted February 16, 2009 If it's an actual reverse sample you'll just have to find the raw wave and edit it. Or import a new one. If it's a reverse effect you have a shot at editing the effect; probably in the reverbs list. to do this you can use "Audacity" (free audio editing software). Link to comment Share on other sites More sharing options...
Members marko46 Posted February 16, 2009 Author Members Share Posted February 16, 2009 Thanks guys. I'll give these a shot.marko Link to comment Share on other sites More sharing options...
Members rambler1959 Posted February 16, 2009 Members Share Posted February 16, 2009 you dont need to re-edit the sample. you can use the truncate function in the edit menu to set the start and stop points of the wave. not hard to do at all and you truncate in samples so you can very easily fine tune the start and stop. Link to comment Share on other sites More sharing options...
Members marko46 Posted February 16, 2009 Author Members Share Posted February 16, 2009 you dont need to re-edit the sample. you can use the truncate function in the edit menu to set the start and stop points of the wave. not hard to do at all and you truncate in samples so you can very easily fine tune the start and stop. Great man. Big help!!!!!!! marko:) Link to comment Share on other sites More sharing options...
Members rambler1959 Posted February 16, 2009 Members Share Posted February 16, 2009 no problem! id give you exact step by step directions on how to do it but mine is at my rehearsal studio at the moment. if you do need them i could have it by tomorrow night. either way it shouldnt be hard to figure out, just hit the sample you want to mess with and press edit then the arrows till you find the start and end point. yeah, that sounds about right. oh and another cool function i figured out was to make the numbers on the screen scroll faster, you can hold down shift with either the plus or minus and it goes by tens... Link to comment Share on other sites More sharing options...
Members marko46 Posted February 17, 2009 Author Members Share Posted February 17, 2009 Thanks again. I knew about the jump in 10's, I just get turned around on some of the other stuff. I appreciate the help man.marko Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.