Members ksl Posted November 6, 2021 Members Share Posted November 6, 2021 Hi all~ I've been up all nite trying to find this seemingly simple schem;;; Since all my typical Strats have their Blender circuit, this is my only Strat that has only 1 Volume, no tone, & a 5-way, I'd like to change the pot to a push/pull type where in the 'up' position I could get NECK p/u operating w/the Bridge, and/or even with the Bridge & Middle.. An 'always on' for the neck won't work as I've got just the one pot...Thnx in advance!! Quote Link to comment Share on other sites More sharing options...
Members badpenguin Posted November 6, 2021 Members Share Posted November 6, 2021 Simple: add a wire from the neck input on the 5 way to the bottom lug, the one closest to the pickguard, on the push/pull. Then the center lug above the neck wire on the push/pull to the output of the 5 way. 1 Quote Link to comment Share on other sites More sharing options...
Members badpenguin Posted November 7, 2021 Members Share Posted November 7, 2021 You're welcome. 1 Quote Link to comment Share on other sites More sharing options...
Members ksl Posted November 11, 2021 Author Members Share Posted November 11, 2021 Thnx again, after the fact, Penguíno~ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.