Members hangwire Posted June 12, 2012 Members Share Posted June 12, 2012 I left a small amp in the basement for 2 years and it has white-ish moldy looking stuff all in the tolex crease especially near the bottom... Suggestions on what to use to cleanit? Vinegar? bleach water? Rip off tolex and do a bad minwax stain? Link to comment Share on other sites More sharing options...
Members Player99 Posted June 12, 2012 Members Share Posted June 12, 2012 Start with dish soap and warm water. Try not to be sloppy and sloshy with the water. Dry off as you go. . Link to comment Share on other sites More sharing options...
Members big69 Posted June 12, 2012 Members Share Posted June 12, 2012 Goo-Gone and a toothbrush Link to comment Share on other sites More sharing options...
Members misterstomach Posted June 12, 2012 Members Share Posted June 12, 2012 you can probably just clean it with soapy water, but a bleach spraydown first wouldn't hurt to make sure you kill all the mold. Link to comment Share on other sites More sharing options...
Members melx Posted June 12, 2012 Members Share Posted June 12, 2012 car interior cleaners work well. Link to comment Share on other sites More sharing options...
Members Trick Fall Posted June 12, 2012 Members Share Posted June 12, 2012 I'd go with bleach and water to kill the mold and then armor all to get it shiny. If its in the creases you might want to try a qtip dabbed in bleach and water. Link to comment Share on other sites More sharing options...
Members hangwire Posted June 12, 2012 Author Members Share Posted June 12, 2012 My wife had a spray bottle with bleach/water mix so I just sprayed it down until it was soaked them wiped it down... will see if that works. Its heading down to my out of town relative's house when I work at Beloit so I didnt want to contaminate hsi spare bedroom/home :| Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.