Members xedgep90x Posted December 4, 2007 Members Share Posted December 4, 2007 is there any way to blend the sound of 2 heads together before a cabinet? I have been running 2 heads into 4 cabs for a while now. I love my tone but it still just sounds like 2 amps next to eachother to me. Id love for it to sound like one huge amp. Is there any gadget out there that will let me blend the powered signals from the 2 heads to power all 4 cabs? thanks Link to comment Share on other sites More sharing options...
Members jnmartin Posted December 4, 2007 Members Share Posted December 4, 2007 a couple of load boxes, a mixer and a power amp... seems like it would be the ticket. Link to comment Share on other sites More sharing options...
Members Weathered Posted December 4, 2007 Members Share Posted December 4, 2007 a couple of load boxes, a mixer and a power amp... seems like it would be the ticket. This would work. Otherwise, I don't know of anything made that can combine speaker level signals into one or multiple cabinets. Link to comment Share on other sites More sharing options...
Members xedgep90x Posted December 4, 2007 Author Members Share Posted December 4, 2007 a couple of load boxes, a mixer and a power amp... seems like it would be the ticket. sounds like a big pain in the ass. Not worth it huh? Link to comment Share on other sites More sharing options...
Members jnmartin Posted December 4, 2007 Members Share Posted December 4, 2007 sounds like a big pain in the ass. Not worth it huh? It seems to be the only way I can think of. It might be glorious, it might be a failure. You should probably just blend at the FOH if you are playing those kind of places. Or is it more of a "I want to hear how badass it can sound" at practice kinda thing? I can see where you're coming from either way. I'd love to have a little setup like that for both. It's not even so much a PITA as much as its gonna cost you more $$$. Link to comment Share on other sites More sharing options...
Members vrm Posted December 5, 2007 Members Share Posted December 5, 2007 couldn't you take the preamp out of both amps to a mixer keep both channels panned right up the middle, then the outs back to each power amp. Wouldn't that blend the two preamps and each power amp get the combined signal? Link to comment Share on other sites More sharing options...
Members JBecker Posted December 5, 2007 Members Share Posted December 5, 2007 Go into one wired stereo cabinet in X so that it blends in the same cabinet is all I can think of. 2 heads into four cabs? Sounds like your setup is a sound nightmare. Link to comment Share on other sites More sharing options...
Members bullhead Posted December 5, 2007 Members Share Posted December 5, 2007 now all you'd need is a proper power amp, and naturally the cab. edit: nvm, i'm wrong. the stereo MASS does not have a line-out. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.