Members DarkHorseJ27 Posted March 16, 2010 Members Share Posted March 16, 2010 In the owner's manual it says this if the Insert jack: INSERT - A 1/4 inch TRS (tip ring sleeve) input /output phone jack designed for use with signalprocessing devices or other line level outboard gear.A special "Y" line cord (stereo to dual mono) isrequired to use this jack. The tip is the send and thering is the return. So would any Y cord work? And how would I set it up with an effect? Thanks. Link to comment Share on other sites More sharing options...
Members tlbonehead Posted March 16, 2010 Members Share Posted March 16, 2010 get an insert cable. Link to comment Share on other sites More sharing options...
Members DarkHorseJ27 Posted March 16, 2010 Author Members Share Posted March 16, 2010 So do I plug the single end into the Insert jack, and the two on the other end into the input and output of the pedal? Link to comment Share on other sites More sharing options...
Members Jon Hiller Posted March 16, 2010 Members Share Posted March 16, 2010 What you need is a Hosa STP-203: http://www.hosatech.com/product/68675/STP-203/_/Insert_Cable%2C_14_in_TRS_to_Dual_14_in_TS%2C_3_m The single end goes into the insert jack as you said, and one end is send going into the effect pedal, and the other is the return from the pedal to the amp. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.