If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
The coating is called "DuraFlex" by JBL, but I saw someone on PSW claim that it's a coating made by a company called Futura. It's a 2-part epoxy system. JBL used to and may still sell a repair kit that's a dual tube mixer like you commonly see with epoxies. It's applied with a stick or knife. It's pretty pricey, like $90.
Try JBl and if they no longer carry it, which is unlikely as it's used on PRX, SRX, VRX, etc. then try Futura.
Looking to touch up a few nicks in the finish. Anybody done this before and do they have any suggestions for what that shade-of-gray is called and/or what sort of product works best?
"If you don't know where you are going, you might wind up someplace else" - Yogi Berra, 1925-2015
and for those of you who have actually used it, the results are nothing like the real 2 part catalyzed epoxy materials that most real speaker manufacturers use. Better than paint for sure but 2 part garage floor coating (in black) is just as good or better (the professionally applied stuff, not the Home Depot kits).