Members gtr475 Posted June 26, 2009 Members Share Posted June 26, 2009 This may be a stupid question but here it goes:I have a seymour Dunkan Little 59 for strat (singelcoil sized humbucker that is splittable) that Im going to put in a standard strat. The thing is that I want the humbucker sound when the switch is all the way down, and singelcoil when the switch is on the second position (bridge and middle). How do I solder the leads to get this working on a standard strat with 5 way switch?Is there any info resources on the net? Link to comment Share on other sites More sharing options...
Members heyhey Posted June 26, 2009 Members Share Posted June 26, 2009 Go to the SD wedsite. They have a lot of different wiring options there. Link to comment Share on other sites More sharing options...
Members gtr475 Posted June 26, 2009 Author Members Share Posted June 26, 2009 Ok, thanks. Link to comment Share on other sites More sharing options...
Members gtr475 Posted June 26, 2009 Author Members Share Posted June 26, 2009 The only thing i could see at the seymour duncan site is connection with a "5-way super switch"...wtf? Is Link to comment Share on other sites More sharing options...
Members TomCray Posted June 26, 2009 Members Share Posted June 26, 2009 Just use a push/pull pot Link to comment Share on other sites More sharing options...
Members Ancient Mariner Posted June 26, 2009 Members Share Posted June 26, 2009 The push pull pot is a good idea. I've had a bucker on a strat and wired it as 'normal' (full time bucker) to the switch. It actually sounded pretty good in pos 2 on the switch, with just a bit more fullness than is usually available. Link to comment Share on other sites More sharing options...
Members dimibetan Posted June 26, 2009 Members Share Posted June 26, 2009 Do you mean, position 1 is full HB and 2 is middle PU+split HB? Try this:http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2t_5w_as Link to comment Share on other sites More sharing options...
Members gtr475 Posted June 26, 2009 Author Members Share Posted June 26, 2009 Ok. so theres no way im going to be able to use the stock 5-way switch to have humbucker on first position and two singel coil on second position (the bridge humbucker in singelcoilmode) with standard singel in middle? can someone point me to were I can find a "5-way super switch"....Man this is comming to be more of a hassle than I thought. Link to comment Share on other sites More sharing options...
Members dimibetan Posted June 26, 2009 Members Share Posted June 26, 2009 Or with push-pull:http://www.seymourduncan.com/support/wiring-diagrams/schematics.php?schematic=1h_2s_1v_2t_5w_pp Link to comment Share on other sites More sharing options...
Members gtr475 Posted June 26, 2009 Author Members Share Posted June 26, 2009 Oh man.......Just what I was looking for. Thanks dimibetan!! Link to comment Share on other sites More sharing options...
Members dimibetan Posted June 26, 2009 Members Share Posted June 26, 2009 Oh man.......Just what I was looking for. Thanks dimibetan!!Anyone might have answered your question earlier if your question was clearer.Anyway, you're welcome!!! Link to comment Share on other sites More sharing options...
Members willyburger Posted June 26, 2009 Members Share Posted June 26, 2009 Lots of places sell the superswitch:http://www.guitarelectronics.com/product/SWL54/5way_4Pole_Strat_Guitar_Lever_SwitchUSA.html StewMac and others as well. Link to comment Share on other sites More sharing options...
Members gtr475 Posted June 26, 2009 Author Members Share Posted June 26, 2009 Sorry dimibetan. i thought that I was clear enough. It is just so that my english sucks. I will try to be clearer next time. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.