Members datru Posted October 2, 2013 Members Share Posted October 2, 2013 I use the loop velcro on the board itself and the hooks on the pedals. Problem is that the hook portion always comes unstuck from the pedals and turns into a gooey mess. Any solution? Link to comment Share on other sites More sharing options...
Members PurpleTrails Posted October 3, 2013 Members Share Posted October 3, 2013 Use industrial strength velcro. FWIW, I do it the other way around, but that really isn't the issue here. Link to comment Share on other sites More sharing options...
Members kayd_mon Posted October 3, 2013 Members Share Posted October 3, 2013 You can get industrial strength at Home Depot or Lowes, or maybe even your local hardware store. You will have few problems with that. Link to comment Share on other sites More sharing options...
Members mrbrown49 Posted October 3, 2013 Members Share Posted October 3, 2013 PurpleTrails wrote: Use industrial strength velcro. FWIW, I do it the other way around, but that really isn't the issue here. Same here. Its easier to keep clean IMO. OP, they also usually sell velcro adhesive right next to the industrial stuff. I've never tried it but it may be worth picking up a tube. The most important thing though is clean the pedal with alchohol and let it dry completely (should flash off pretty quick) and then stick on the velcro. Any grease, dirt, grime, fingerprints etc. on the surface will compromise the bond. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.