Members zesty brick Posted February 8, 2007 Members Share Posted February 8, 2007 the bridge on my ibanez BTB 200 is acting up, it keeps lowering the e string, i screw the two little screws back up but it just drops again, and i get a low action fret buzz, any help Link to comment Share on other sites More sharing options...
Members phildogger Posted February 8, 2007 Members Share Posted February 8, 2007 loctite? Link to comment Share on other sites More sharing options...
Members bassdudeguy Posted February 8, 2007 Members Share Posted February 8, 2007 a fender Link to comment Share on other sites More sharing options...
Members Narcosynthesis Posted February 8, 2007 Members Share Posted February 8, 2007 Get some threadlock, put a drop of that on the thread of the screw, set it to the right height and it will keep it there (you can still move it yourself, but it shouldn't come undone itself Kinda like using superglue or nail polish but a little less permanent David Link to comment Share on other sites More sharing options...
Members georgestrings Posted February 8, 2007 Members Share Posted February 8, 2007 Get some threadlock, put a drop of that on the thread of the screw, set it to the right height and it will keep it there (you can still move it yourself, but it shouldn't come undone itselfKinda like using superglue or nail polish but a little less permanentDavid yup... I always had some blue locktite around, due to working on Harleys - other bass related uses for it are the nuts on Schaller straplocks, and I also put a spot on speaker screws whenever I do any cab work - keeps 'em from vibrating loose... - georgestrings Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.