Members HighFlightMusic Posted July 15, 2003 Members Share Posted July 15, 2003 Any tips on frequencies to work on to get rid of the tunnel sound? We set up in an middle school auditorium, so the accoustics are not that good, but I still think there is room for improvement. We have a three band with a mid sweep on the board. We also have a 31 band on the main out. Thanks, Steve Link to comment Share on other sites More sharing options...
Members tlbonehead Posted July 16, 2003 Members Share Posted July 16, 2003 Originally posted by HighFlightMusic Any tips on frequencies to work on to get rid of the tunnel sound?We set up in an middle school auditorium, so the accoustics are not that good, but I still think there is room for improvement.We have a three band with a mid sweep on the board. We also have a 31 band on the main out.Thanks,Steve Somewhere in the lower mids probably. Maybe in the 300-1000hz range. Is it on everything that goes through the mains,or just certain things? If it is the whole total sound,do it at the main EQ. What does your EQ look like usually as far as where the bands are at? Link to comment Share on other sites More sharing options...
Members HighFlightMusic Posted July 16, 2003 Author Members Share Posted July 16, 2003 As far as I can tell, it's just the one speake on a wireless. I play bass in the band (and am trying to teach a couple other people to run sound for the church) so it is a little hard to hear the FOH on the band. Running a CD or listening to the band minus the bass sounds fine though, so I don't think it is a factor for other channels. Steve Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.