Members Marko Posted June 9, 2012 Members Share Posted June 9, 2012 I'm going to need to connect ddrum triggers that take Female XLR, to a ddrum module/brain that takes Link to comment Share on other sites More sharing options...
Members Scodiddly Posted June 9, 2012 Members Share Posted June 9, 2012 Maybe. The ring contact generally doesn't end up with a connection in a TS jack, which might end up losing you the whole balanced signal. Ideally you can try this out before the actual event. Link to comment Share on other sites More sharing options...
Members Marko Posted June 10, 2012 Author Members Share Posted June 10, 2012 Are you saying they would work but may be unbalanced, or that I might not get anything? I don Link to comment Share on other sites More sharing options...
Members Coaster Posted June 10, 2012 Members Share Posted June 10, 2012 which brain is it? all triggers i have are TS Link to comment Share on other sites More sharing options...
Members Marko Posted June 10, 2012 Author Members Share Posted June 10, 2012 which brain is it? all triggers i have are TS DD1M drum sound module and DRT5 Trigger kit. I know the module isn Link to comment Share on other sites More sharing options...
Members Marko Posted June 10, 2012 Author Members Share Posted June 10, 2012 Pretty much what I Link to comment Share on other sites More sharing options...
Members Coaster Posted June 10, 2012 Members Share Posted June 10, 2012 sometimes it wont. it likely will in this case although it may be advisable to connect pin 3 to pin 1 at some point. i also highly doubt the triggers are balanced. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.