Members oachs83 Posted February 1, 2015 Members Share Posted February 1, 2015 Hey guys quick question here as I am brand new to powered speakers. I just bought a pair of EV ELX112p speakers that I am going to use for mains. I looked all over in the manual and can not find an answer. I will be using these in as mains in a live band situation and will run them mono. I want to buy good quality cables. On Sweetwater's website under the speaker cable category there is not one cable in 50' length that is a XLR. I need to run a cable from one speaker output to the other input. The output is XLR only. Do I not need a speaker cable for the output? If not what kind of cable do I need? Why are the XLR speaker cables not even offered through Sweetwater? Also do I need a speaker cable from mixer to powered mains or not? What type of cable would I need? I attached a spec sheet of my speakers. Thanks Link to comment Share on other sites More sharing options...
Members madjack Posted February 1, 2015 Members Share Posted February 1, 2015 You will need xlr mic cables for signal to those cabinets, and you will also need to provide ac power to them, as well. Any decent quality balanced mic cable will do. I usually get mine from Mark at http://www.audiopile.net Link to comment Share on other sites More sharing options...
Members nchangin Posted February 1, 2015 Members Share Posted February 1, 2015 Standard balanced XLR Mic cable all you need as stated above, you can daisy chain one to the other, or run one from each output to each speaker on the mixer, if your in a "band" situation it really doesn't matter as "stereo" is not needed, if you are mixing from a source that is stereo run left out from mixer to one speaker right out of mixer to other speaker. Link to comment Share on other sites More sharing options...
Members nchangin Posted February 1, 2015 Members Share Posted February 1, 2015 and do NOT buy Mogami brand silver mic cables, total garbage. I have a pair of ZLX's and they get stuck in those boxes. Link to comment Share on other sites More sharing options...
Members hfc7713 Posted February 1, 2015 Members Share Posted February 1, 2015 Think of it this way. You are not actually connecting the speakers to the mixer. You are connecting the amps in those speaker boxes to the mixer and therefore you do not require speaker cables at all.As other have said - use only XLR cables commonly known as mic cables. Get he best quality you can afford and they will serve you well. One last thing, shorter XLR cables can be connected together for more length. Link to comment Share on other sites More sharing options...
CMS Author Craig Vecchione Posted February 1, 2015 CMS Author Share Posted February 1, 2015 Yeah, "mic" cable is basically a misnomer, as XLR to XLR balanced cable is used for all signal and line interconnections. Link to comment Share on other sites More sharing options...
Members oachs83 Posted February 1, 2015 Author Members Share Posted February 1, 2015 Thanks guys Link to comment Share on other sites More sharing options...
Members monthlymixcd Posted February 2, 2015 Members Share Posted February 2, 2015 I've gotten "premium" balanced XLR cables before... and rarely did they live up to the hype. However, based on excellent reviews I've been meaning to try some of Mark/Audiopile's "quad" cables (two twisted pairs and a shield vs. a single twisted pair = redundancy/reliability) from Audiopile.net, but haven't gotten around to it since the inexpensive cables that I get at the local Music Go Round (Pro Custom or something like that) have yet to have issues or break down. Really, any quality cable with a twisted pair and a braided shield will do the trick. Neutrik ends are nice, but a luxury if you're on a budget. Link to comment Share on other sites More sharing options...
Members Ed Storer Posted February 2, 2015 Members Share Posted February 2, 2015 When I was running powered speakers, I made up a special power cable for one of the speakers. I got a 50-foot extension cord at my local hardware store and replaced the female plug with an IEC plug. That way I was able to connect both speakers to a common outlet (a regular extension cord plugged into the same circuit as the mixer). http://www.newark.com/bulgin/px0686/iec-power-connector-plug-10-a/dp/83K9163?mckv=sCqB8vi7L|pcrid|53816214381|plid|&CMP=KNC-GPLA Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.