Members hangwire Posted January 16, 2007 Members Share Posted January 16, 2007 I don't see any screws or what not... how do you mount it and adjust height? I also have a GFS lipstick and I can tell that screws into the body as it sits on an eloevated bracket... but the p-90 doesn't look like it has anything... Link to comment Share on other sites More sharing options...
Members erksin Posted January 16, 2007 Members Share Posted January 16, 2007 You either need a small bracket that screws into the bottom of the cavity, or screw it directly into the wood. Use J-Bass pickup screws and springs, and a little foam underneath helps too. Link to comment Share on other sites More sharing options...
Members hangwire Posted January 16, 2007 Author Members Share Posted January 16, 2007 You either need a small bracket that screws into the bottom of the cavity, or screw it directly into the wood. Use J-Bass pickup screws and springs, and a little foam underneath helps too. where would the screw connect with the pickup? there are two little screws on the underside... Link to comment Share on other sites More sharing options...
Members General Delgado Posted January 16, 2007 Members Share Posted January 16, 2007 I think you need a nut for your screws. Link to comment Share on other sites More sharing options...
Members erksin Posted January 16, 2007 Members Share Posted January 16, 2007 where would the screw connect with the pickup? there are two little screws on the underside... Do you have one to look at? There are two holes that go through the entire pickup (between the 1st and 2nd and 5th and 6th string polepieces) - the screw gets inserted through the cover and pickup, comes out the bottom and goes into the wood. Springs and foam provide the tension necessary for adjusting the height. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.