Members Slunderfungus Posted June 12, 2009 Members Share Posted June 12, 2009 Teach it the words!!!! Well I actually do have a probelm. I have a MXR10 band EQ that was givene to me by the guy I bought an amp from. It is one of the original EQs in that It is wired for 110v AC instead of 9vDC. It worked with the Vintage Club fine untiul I changed power tubes. I switched from Sovtek's to JJs and immegiately the pedal started hum. When I put the original tubes back it no longer hums. The amp sounds way better with the JJs so I quit usingthe EQ The problem turns out that if you use any gain at all the pedal makes it hum. Is there any way to get rid of this hum? Link to comment Share on other sites More sharing options...
Members goodhonk Posted June 12, 2009 Members Share Posted June 12, 2009 you already used the only good response. Link to comment Share on other sites More sharing options...
Members Slunderfungus Posted June 12, 2009 Author Members Share Posted June 12, 2009 There's got to be something inside causing it to hum it seem like it should be repairable. Link to comment Share on other sites More sharing options...
Members pbone Posted June 12, 2009 Members Share Posted June 12, 2009 There's got to be something inside causing it to hum it seem like it should be repairable. Bees. Link to comment Share on other sites More sharing options...
Members goodhonk Posted June 12, 2009 Members Share Posted June 12, 2009 Bees. i sit corrected. Link to comment Share on other sites More sharing options...
Members Slunderfungus Posted June 12, 2009 Author Members Share Posted June 12, 2009 Well what kind of bees do I get that hum quieter??? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.