Members blind radish Posted June 12, 2011 Members Share Posted June 12, 2011 I bought a used EH Mem Boy pedal ... got it home and it worked, then didn't, then did, then didn't ... .now it doesn't. Any of you guys proficient with working on these pedals. Opened the back and looks to be all circuit board. Which to me is a bad sign. I click it on, light goes on, but controls do absolutely nothing. can it be refurbished ... would it be worth it? thanks for any light you can shed Link to comment Share on other sites More sharing options...
Members THAT4301 Posted June 12, 2011 Members Share Posted June 12, 2011 Do you have a multimeter? Can you rule out the power supply? Link to comment Share on other sites More sharing options...
Members jimosity Posted June 13, 2011 Members Share Posted June 13, 2011 I had a similar issue with a Memory Toy; light turned on, but no delay. Turns out that the I was daisy chaining it with too many other units and it wasn't getting enough power to actually work - A normal 9VDC 200ma didn't work on it's own, but a OneSpot worked just fine. Link to comment Share on other sites More sharing options...
Members driverhasabomb Posted June 13, 2011 Members Share Posted June 13, 2011 Check your power source. Other than that just contact EHX they'll fix it for free or a small charge. Link to comment Share on other sites More sharing options...
Members blind radish Posted June 13, 2011 Author Members Share Posted June 13, 2011 I had a similar issue with a Memory Toy; light turned on, but no delay.Turns out that the I was daisy chaining it with too many other units and it wasn't getting enough power to actually work - A normal 9VDC 200ma didn't work on it's own, but a OneSpot worked just fine. Yep ... it was the power supply ... used a different one and it was all good thanks guys Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.