Members Jon Hiller Posted May 22, 2012 Members Share Posted May 22, 2012 Also, I'm in the pit band for this, but the FOH guy didn't have me up in the mix very loud... you can hear it a bit, though. Good example of it's clean sound through one of my 1X12 cabs... when you can actually hear me. [video=youtube;1zQMhDlUT-k]http://www.youtube.com/watch?v=1zQMhDlUT-k Link to comment Share on other sites More sharing options...
Members boytbpc Posted May 22, 2012 Members Share Posted May 22, 2012 I need to stop coming here. Just more things I don't need. Link to comment Share on other sites More sharing options...
Members django5 Posted May 22, 2012 Members Share Posted May 22, 2012 If there's one thing I don't need, it's to be in the dark with a woman that sounds just like Jerry Reed. Link to comment Share on other sites More sharing options...
Members RoboPimp Posted May 22, 2012 Author Members Share Posted May 22, 2012 5 watts is loud? I'll say this as someone who normally gigs with a 75 watt boogie this thing was tuned up just right, as you cranked the volume it didn't start clipping until way at the end, a lot of breathing room in there. And it didn't turn to fizz, it was just all cylinders wide open. it was easily gigging volume, where it will "lack" is in that low end punch it did have a lot of low end to it but once you crank this thing up to clipping the low end will get "soft" solution: mic it up Link to comment Share on other sites More sharing options...
Members eti Posted May 22, 2012 Members Share Posted May 22, 2012 You should really allow embedding. Link to comment Share on other sites More sharing options...
Members Jon Hiller Posted May 22, 2012 Members Share Posted May 22, 2012 I'll say this as someone who normally gigs with a 75 watt boogiethis thing was tuned up just right, as you cranked the volume it didn't start clipping until way at the end, a lot of breathing room in there. And it didn't turn to fizz, it was just all cylinders wide open.it was easily gigging volume, where it will "lack" is in that low end punchit did have a lot of low end to it but once you crank this thing up to clipping the low end will get "soft"solution: mic it up You do have a bit of this, to be sure. I think I am going to swap out my Eminence Legends for a lower power speaker in my cabs to see if I can gain just a little more low end, since I think it seems to work harder driving my 1X12 cabs with the 70 watt speakers than it did when I was driving the Kustom 4X12, which I think had 50 watt speakers. Part of that difference is clearly the difference between a 4X12 and a pair of 1X12 cabs, too, though. A 4X12 is almost always going to have more low end in that comparison. Link to comment Share on other sites More sharing options...
Members Danhedonia Posted May 23, 2012 Members Share Posted May 23, 2012 "it was designed as a foghorn for lighthouse use." I really would like to play through this. Just once. Because I'd be deaf, after. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.