Members nasum Posted August 27, 2005 Members Share Posted August 27, 2005 Something that I can drive my Gflex 2x12 with and use the stereo out from the Tonelab. Any ideas? I was thinking maybe VHT but I can't find anything under 50w per side. I don't really need anymore than 25w per side, and if possible I'd like to keep it under that. Know of any such items? Link to comment Share on other sites More sharing options...
Members scud Posted August 27, 2005 Members Share Posted August 27, 2005 mesa 20-20 or marshall 20-20 Link to comment Share on other sites More sharing options...
Members nasum Posted August 27, 2005 Author Members Share Posted August 27, 2005 I suppose I should also mention that I'm not terribly fond of EL84s. I'd prefer it to have 6L6/6551 type tubes. Link to comment Share on other sites More sharing options...
Members Pavel Posted August 27, 2005 Members Share Posted August 27, 2005 More wattage than you need, but...http://www.groovetubes.com/product.cfm?Product_ID=1718 Or you can always run two THD Bivalves or something (line in of the effects loop) with single 6l6s in 'em. Link to comment Share on other sites More sharing options...
Members nasum Posted September 24, 2005 Author Members Share Posted September 24, 2005 how about an ultra cheap low wattage solid state? 10-25w per side. Link to comment Share on other sites More sharing options...
Members tlbonehead Posted September 24, 2005 Members Share Posted September 24, 2005 I've bever seen a single ended (stereo or mono) 6V6/6L6 based power amp. If there are any,they would probably be up in the small builder/high cost range. That would give you probably 7-10 watts/channel. Or a dual 6V6 stereo power amp,which would give you a hair more output probably than the dual EL84 models. I guess you could take a dual 6L6/EL34 stereo power amp and set it up for 6V6's. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.