Members ncook Posted November 12, 2005 Members Share Posted November 12, 2005 Is there anyway to reset it to factory default? I want to traash the former owners presets and start from the beggining. By the way, this thing screams! I picked up a 2X12 Marshall cab and the bottom end is crazy. I love the tubes man! I actually have a pre and power amp setup that are both tube, its a dream come true! Link to comment Share on other sites More sharing options...
Members crwnedblasphemy Posted November 12, 2005 Members Share Posted November 12, 2005 PM Duke of Metal....he is all things ADA! Link to comment Share on other sites More sharing options...
Members ncook Posted November 12, 2005 Author Members Share Posted November 12, 2005 ^ Link to comment Share on other sites More sharing options...
Members GITTarzann Posted November 12, 2005 Members Share Posted November 12, 2005 Yes there is a way, but I don't remember off hand ...sorry Link to comment Share on other sites More sharing options...
Members Guttermouth Posted November 12, 2005 Members Share Posted November 12, 2005 all things ada ------> http://www.adadepot.com/ Link to comment Share on other sites More sharing options...
Members Romanian Reaper Posted November 12, 2005 Members Share Posted November 12, 2005 Need clips.......losing power.....need clips..... Link to comment Share on other sites More sharing options...
Members Duke of Metal Posted November 12, 2005 Members Share Posted November 12, 2005 go to www.adadepot.com and download the manual from there. You should be able to find everything you need in there. Its located under: ADA Gear --> Pre-amps --> MP-1 --> manual Cheers! Link to comment Share on other sites More sharing options...
Members ncook Posted November 12, 2005 Author Members Share Posted November 12, 2005 Originally posted by Duke of Metal go to www.adadepot.com and download the manual from there. You should be able to find everything you need in there. Its located under: ADA Gear --> Pre-amps --> MP-1 --> manual Cheers! I looked through it and didnt see it. It did have the preset settings for the factory default, but no instructions as to setting it back. Maybe I just have to do them one by one. Link to comment Share on other sites More sharing options...
Members squealie Posted November 12, 2005 Members Share Posted November 12, 2005 Don't {censored}ing stress about resetting it.... There's like a total of 5 parameters per patch. Link to comment Share on other sites More sharing options...
Members RustyMctavish Posted November 12, 2005 Members Share Posted November 12, 2005 3.6 LOAD PRESET PROGRAMS There are 29 factory preset programs (1-29) that can be loaded into the internal program memory via the front panel. These can be loaded at one time, or they can be brought into the MP-1 's working register one at a time (level 2 software). To load all 29 programs, press the STORE button. The STORE button will blink. Press BANK, and while holding it down, press 1. Display reads "LP" (Load Programs). Programs 1 thru 29 will be erased and written over by the preset programs. Reference section 6.0 MEMORY PRESET SETTINGS for description of factory presets. To load just one program (level 2 software), press BANK, and while holding it down, press CHORUS RATE. "P" will be displayed, indicating that a preset is being recalled. Now select the preset you want by using ^ V. You may use or edit this program without erasing any of your own programs, or you may save it by using the Store sequence. Link to comment Share on other sites More sharing options...
Members Whammyless Posted November 12, 2005 Members Share Posted November 12, 2005 When I owned mine I could have sworn there was a way to reset it described in the manual. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.