Members Gravity Posted June 29, 2009 Members Share Posted June 29, 2009 I posted this in the amp forum too, but figured DIY is another good spot looks like this I was just given one of these in non working order. I have not bothered to power it up yet .... don't think it would nicely anyway. The fuse is ????? Looks like someone reached into the fuse holder and pulled the holder inside out. Maybe tried to make the fuse holder into a closed circuit? broken off speaker wires ... this is an old amp and it's had a rough rock'n'roll trip I can't seem to fins a schem for it. This design has 1 pair 6l6GC in the power section with a solidstate pre-amp. The only Peavey Classic type schems I've been able to find have tube preamps and/or/use EL84 output tubes. If someone has a schematic or any other info about this amp, I'd really appreciate it. It pretty much feel into my lap today and looks like a good project to spend some time on ... see if I can get her running and then decide if any mods are worth attempting. thanks! Link to comment Share on other sites More sharing options...
Members WRGKMC Posted June 29, 2009 Members Share Posted June 29, 2009 The classic B has a two tube output, it may be close enough to troubleshoot with. The other Classic models are either 4 tube or all tube. Not sure , but this may be a bass amp, if so the diagram Classic "B" for bass amp may apply. http://www.schematicheaven.com/post70s.htm Link to comment Share on other sites More sharing options...
Members Gravity Posted June 29, 2009 Author Members Share Posted June 29, 2009 dude, that's it! thank you so much! Link to comment Share on other sites More sharing options...
Members Belva Posted June 30, 2009 Members Share Posted June 30, 2009 Have you tried contacting Peavey? I hear they're really good about getting schematics to people in need. Might cost a few bucks but well worth it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.