Members zinzin Posted October 5, 2006 Members Share Posted October 5, 2006 i want to try out the line-out feature of my amp. what cable do i need? Link to comment Share on other sites More sharing options...
Members varakeef Posted October 5, 2006 Members Share Posted October 5, 2006 Instrument cable will do, depending on the plugs you need. I assume you have 6,3 mm plug as your line out, the other end could be almost anything I guess. Where you going to send the signal? Link to comment Share on other sites More sharing options...
Members zinzin Posted October 5, 2006 Author Members Share Posted October 5, 2006 into a m-audio octane preamp and then into PC cubase. Link to comment Share on other sites More sharing options...
Members varakeef Posted October 6, 2006 Members Share Posted October 6, 2006 Then put a basic 6,3 mm instrument cable from your amps line out into Octanes line in. Simle as that. Link to comment Share on other sites More sharing options...
Members where02190 Posted October 6, 2006 Members Share Posted October 6, 2006 1/4" unbalanced line level cable, IOW your basic guitar cable into the line input, not the mic input of your M-Audio interface. Keep the length short, under 18ft, and if you must extend go into a direct box and XLR from that to the XLR input of your M-Audio. Don't expect much, line outs sound nothing like the real thing. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.