Members primal1 Posted November 20, 2013 Members Share Posted November 20, 2013 The strings on my Dot were in need of a change, so I figured I'd experiment with this a bit, as I've heard it can give the guitar a "woodier" sound. To put it plainly, I hated the sound(with these strings, anyway). Besides being harder to play, the acoustic strings were quieter and thinner-sounding than electric strings, with the only notable benefit being a slight increase in percussiveness. It was kind of an interesting sound, and I'm sure I could have adjusted my setup to suit it better, but the trade-off in playability makes it not worth it to me. As it was, the electric strings sounded much better. Link to comment Share on other sites More sharing options...
Members liko Posted November 20, 2013 Members Share Posted November 20, 2013 The bronze wrapping of the acoustic string is non-ferrous (an 80/20 string is 80% copper and 20% tin; no iron to speak of); as such, only the steel core of an acoustic string can disturb the magnetic field of the pickup and produce an electrical signal. So I have no doubt they'd have a thinner sound.And yes, acoustic strings, because they have to "drive" the top of the guitar with the varying tension produced by their vibration, are thicker for the same general label: "light" on an electric is around 9-42, while acoustic strings with the same "light" rating typically have a 12-54 gauge or thereabouts. You'd have to get "extra-light" acoustic strings (10-47) to approach the average electric set (10-46 is considered "regular" by most manufacturers). Link to comment Share on other sites More sharing options...
Members kayd_mon Posted November 21, 2013 Members Share Posted November 21, 2013 Yes, the metal is thr issue for the tinny sound. I have a Hamer Duotone, which is a hybrid with an acoustic bridge and regular Duncan humbuckers, and I tried acoustic strings on it. The piezo sounded a little better that way, but the humbuckers sounded awful. Then I tied a set of DR Zebra wounds, which have nickel and bronze on the wound strings. They were only slightly better, and they still sounded awful with the humbuckers. I now use regular electric nickel wounds, 12 gague. Link to comment Share on other sites More sharing options...
Members kolapsar Posted November 21, 2013 Members Share Posted November 21, 2013 I once put electric guitar strings on a nylon string acoustic. the neck held up but one of the tuners popped off Link to comment Share on other sites More sharing options...
Members primal1 Posted November 21, 2013 Author Members Share Posted November 21, 2013 I knew about the difference in string gauges and magnetic properties. I just figured I'd try it out anyway since there doesn't seem to be many people trying it out on YouTube. I also remember hearing about some guitarist that swore by using acoustic strings on his electric guitar, but I can't remember who. As of now, I think he's full of ****. Link to comment Share on other sites More sharing options...
Members Buttcrust Posted November 21, 2013 Members Share Posted November 21, 2013 Maybe I'm wrong, but I do believe I read somewhere (probably here) that electric guitar strings are magnitized so the pickups "pick up" better than normal "acoustic" strings...hmmSomeone asked why 1 of his electric guitar strings wasn't as loud as the other strings. The dead one was an acoustic (steel) string. Link to comment Share on other sites More sharing options...
Members stormin1155 Posted November 21, 2013 Members Share Posted November 21, 2013 There are several string manufacturers that make acoustic strings containing more ferrous materials. DR Zebras is one I've tried. If you like the sound of acoustic strings, give them a try. I think you'll find you'll have better volume balance between the strings.I once installed a strat pickup on an acoustic, and with regular acoustic strings it didn't sound good at all... very low response from the wound strings, but the Zebras it was fine.Magnetic pickups made for acoustic guitars are designed to deal with the uneven string magnatism of regular acoustic strings. Link to comment Share on other sites More sharing options...
Members thewthrman Posted November 21, 2013 Members Share Posted November 21, 2013 I put 12s with a wound G on my piezo-equipped electric to see if it helped. It did indeed. The thing that makes a hybrid guitar be more convincing as an acoustic is the wound G if you can get used to it. I actually found that 10s sounded ok with the wound G.I am talking about electric strings. Acoustic strings are too expensive to waste on an electric. Link to comment Share on other sites More sharing options...
Members kayd_mon Posted November 21, 2013 Members Share Posted November 21, 2013 @thewthrman You are correct. I always use a wound 3rd (usually with 11s), so it was no real transition for my hybrid guitar. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.