Jump to content

Axess Buffer - Internal Boost Trim Pot


bmast160

Recommended Posts

  • Members

I just found out that this pedal has an internal boost trim pot and I dont want the pedal to be boosting the signal at all. Does turning the internal trim pot counterclockwise turn the boost down? Had to take the entire pedal apart to get at the trim pot and dont want to have to do it again if i turn the pot the wrong way. The stock setting was almost all the way counterclockwise but not completely.

Link to comment
Share on other sites

  • Members
I just found out that this pedal has an internal boost trim pot and I dont want the pedal to be boosting the signal

 

From what I can find on the internet, the Axess is an op-amp based buffer (with an 18 volt charge pump), and yes, the trim pot is a level control. Fully conterclockwise should be the buffer-only position, with no signal boost. You'll know right away if that's not the case.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...