Members BiggRedd Posted October 10, 2016 Members Share Posted October 10, 2016 I have a combo 1x12 black star ht40. I want to use the internal speaker plus add an extension cabinet 1x12. I have a 1x12 16ohm speaker cabinet ready to go. Been reading about not connecting wrong impodence. ( spell check on that last word). I see a 1x16 ohm, a 1x8ohm or 2x16 ohm with a painted line connecting them. along with an emulated out. Where do I plug the extension in to keep the internal and power the external? Do I unplug the internal speaker from the 1x16 and then plug that and the extension into the two other plugs to make them 2x16? Link to comment Share on other sites More sharing options...
Members DeepEnd Posted October 10, 2016 Members Share Posted October 10, 2016 For future reference, here's a link to the manual: https://www.blackstaramps.com/pdf/ha...0-handbook.pdf. You would plug both speakers into the "1 x 8 OHM or 2 x 16 OHM" jacks. Scroll down to page 6 where it says "4. Speaker Outputs": The outputs marked ‘1x8 Ohm or 2x16 Ohm’ are for the connection of either a single 8 Ohm extension cabinet or two 16 Ohm cabinets. Also, the internal loudspeaker of the HT Club 40 combo can be plugged in here if it is used with a 16 Ohm extension cabinet. Incidentally, it's spelled "impedance." We all learn something at some point. Link to comment Share on other sites More sharing options...
Members BiggRedd Posted October 10, 2016 Author Members Share Posted October 10, 2016 Thanks. I did read that, just wanted to make sure I was reading it right. Second opinion before I did it Link to comment Share on other sites More sharing options...
Members Keryn Posted June 20, 2020 Members Share Posted June 20, 2020 Is it possible to connect a blackstar 2 x 12 cab to the ht 40 and have the cab and amps internal speakers all running? How would that be connected? Link to comment Share on other sites More sharing options...
Members DeepEnd Posted June 23, 2020 Members Share Posted June 23, 2020 On 6/20/2020 at 3:17 AM, Keryn said: Is it possible to connect a blackstar 2 x 12 cab to the ht 40 and have the cab and amps internal speakers all running? How would that be connected? It depends on the impedance of the 2X12 cab. If it's 16 Ohms you'd connect the cab to one of the 16 Ohm speaker jacks and the internal speaker to the other. If it's 8 Ohms you can't do it. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.