Members burton4snow Posted December 1, 2009 Members Share Posted December 1, 2009 i have 2 heads hooked up to one cab via an a/b/y switch. when i switch from one head to the next is it ok two have the power load of the other head dead end into the switch or should i put it on standby. Link to comment Share on other sites More sharing options...
Members GuitarMasterNot Posted December 1, 2009 Members Share Posted December 1, 2009 You should put the amp with no load on standby Link to comment Share on other sites More sharing options...
Members jelloman Posted December 1, 2009 Members Share Posted December 1, 2009 You should look into adding one of these... http://www.tonebone.com/tb-headbone-vt.htm you can run both heads with it... Link to comment Share on other sites More sharing options...
Members superdistortion Posted December 2, 2009 Members Share Posted December 2, 2009 I think a valve amp should always be hooked up to a cab while it's plugged in. Link to comment Share on other sites More sharing options...
Members burton4snow Posted December 2, 2009 Author Members Share Posted December 2, 2009 You should look into adding one of these...http://www.tonebone.com/tb-headbone-vt.htmyou can run both heads with it... For 350 bucks i'm not into that much but thanks! i guess what people are telling me is unless its got the load going all the way to the cab put it on standby. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.