Members thunder100 Posted January 27, 2012 Members Share Posted January 27, 2012 Dear Community Innocent question-->No answer so far in amp forum what happens if i use my Weber 6A20(DLX reverb head) like this (Of couse in an amp cabinet) without the covers It sits static in the living room so ther is no danger that the tubes may fall out Thanks Roland Link to comment Share on other sites More sharing options...
Members wagdog Posted January 27, 2012 Members Share Posted January 27, 2012 Probably nothing. Those covers do provide some shielding from interference (which you probably won't notice), they also provide tension which can keep them from rattling while playing (which you might notice), protection from breakage and of course they prevent the tubes from falling out. That looks nice - did you build it yourself? Gotta a pic of the innards? Link to comment Share on other sites More sharing options...
Members thunder100 Posted January 27, 2012 Author Members Share Posted January 27, 2012 Thanks a lot-->all this is no concern to me ,as it is a head,the speaker cabs are somewhat away and I will replace the grill with a glass like the Hughes&Klettner's Here are some inner pictures http://imageshack.us/g/814/img5332resize.jpg/ It was made by one of the Weber recommended builders(can give e@mail on PM)-->I am not good enough for that And MAN that amp rocks Could allready play it vs a real one (Old one not RI) and vs the AXE FX 2-->Identical a bit more dynamic response Roland Last no name knob is master volume Link to comment Share on other sites More sharing options...
Members wagdog Posted January 27, 2012 Members Share Posted January 27, 2012 That looks awesome, really, really nice. I bet it sounds amazing. Do you have any sound clips? Love to hear it. I've built a couple amps and am building up a champ style amp right now (waiting on the chasis). Link to comment Share on other sites More sharing options...
Members thunder100 Posted January 27, 2012 Author Members Share Posted January 27, 2012 Sorry no clips (YET was still to lacy to buy a decent Mic,my elder ones are finished) .But once I get it ill post my sloopy playing-->Yes its a ringer.There is always a real debate about circuit print vs wire--> I proved to myself vs DLX RVB RI that there is a tiny difference both in sound(ears) but also if you professionally measure the current flow.Key is lying in components quality, and the way you solder as well AS IN SOLDER ITSELF Anyway Thanks for the answer Roland Link to comment Share on other sites More sharing options...
Members GilmourD Posted January 27, 2012 Members Share Posted January 27, 2012 That's awesome. I keep looking at the 6A80... Need money! Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.