Members richiejazz Posted December 1, 2011 Members Share Posted December 1, 2011 Sorry for the v-drum subject and also if this is a stupid question! Im wondering if its possible to swap around two of the triggers on my td20. Basically I want to exchange Aux 2 with Aux 4: copy everything from Aux 2 on to Aux 4 across the board and vice versa. Is this this possible? Link to comment Share on other sites More sharing options...
Members race81 Posted December 1, 2011 Members Share Posted December 1, 2011 hhmm, not sure what your asking. You can plug in any trigger to what ever hole you wish and then patch what ever effect or drum you want to said trigger. Not a stupid question, but if I am not understanding you correctly.......that is my stupid answer. Link to comment Share on other sites More sharing options...
Members richiejazz Posted December 1, 2011 Author Members Share Posted December 1, 2011 I simply want everything on the module that I have assigned to Aux 4 (including sounds and parameters etc) copied across to Aux 2 and everything I have on Aux 2 copied across to Aux 4. A straight exchange. Link to comment Share on other sites More sharing options...
Members race81 Posted December 1, 2011 Members Share Posted December 1, 2011 you should be able to just swap one trigger for the other, or you could go into the module and re-assign one aux setting to the other. Link to comment Share on other sites More sharing options...
Members cearleywine Posted December 2, 2011 Members Share Posted December 2, 2011 I've no idea how this module works, but couldn't you just swap the cables coming in? Link to comment Share on other sites More sharing options...
Members DW_Man_TX Posted December 3, 2011 Members Share Posted December 3, 2011 cearlywine nailed it. just swap cables at the brain. or edit your settings, you can copy entire kits but not individual drums as far as i know. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.