Members ned911 Posted May 25, 2006 Members Share Posted May 25, 2006 Playing a small club tonight and thought I would put a small PA together instead of lugging the big rack. Here is what it would consist of: Mixer: Carvin 1644Power Amp: Carvin DCM 2000 (only because it's not as deep as the PV2600)FOH: PV SP5'sMonitors: Carvin 722'sFeedback: PV Ferett 2 Plan is to run the SP5's from 1 Speakon and 1 1/4" off one side of the DMC and daisy chain the 722's off the other side. We've got a LS700P sub but the club is so small there is no place to even put it. Will run 4 vocals and a small amount of guitar through FOH. Should I run the Feedback Ferett on FOH or just monitors? Should I use the X-over or just leave it in the big rack since we aren't running bass or kick through the mixer? Ned Link to comment Share on other sites More sharing options...
Members agedhorse Posted May 25, 2006 Members Share Posted May 25, 2006 Not sure how you plan to use the crosover if you brought it. What about eq's rather than the ferrits? They might be more useful? Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.