Members madball24 Posted December 15, 2009 Members Share Posted December 15, 2009 It says they can adapt to a mic adapter. What mic adapter will work with them? thanks Link to comment Share on other sites More sharing options...
Members MrJoshua Posted December 15, 2009 Members Share Posted December 15, 2009 If you take them off the little clip-on drum mounts, you can unscrew the insert and you're left with a standard-sized threaded hole for a mic stand. Link to comment Share on other sites More sharing options...
Members madball24 Posted December 15, 2009 Author Members Share Posted December 15, 2009 do they sell a thread that will fit the clip thats already on the mic for a mic stand? Link to comment Share on other sites More sharing options...
Members Mogwix Posted December 16, 2009 Members Share Posted December 16, 2009 do they sell a thread that will fit the clip thats already on the mic for a mic stand? uh, what? The mics have an integrated mic stand thread already, you don't need an adapter. Link to comment Share on other sites More sharing options...
Members NUSound Posted December 16, 2009 Members Share Posted December 16, 2009 I think the question is: Can you mount them to a stand (possibly with an adapter), without removing the drum mount? My answer to that: I don't know. If there is an adaptor out there to do it, all it would do is make the mic bulky and obtrusive. Taking the mount off is almost no work at all, and the best way to go, IMO. Link to comment Share on other sites More sharing options...
Members agedhorse Posted December 16, 2009 Members Share Posted December 16, 2009 No. The drum mount comes off. For drums, I have found that they work well on a lot of different rims. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.