Members Count Dissident Posted February 22, 2010 Members Share Posted February 22, 2010 Hi, I just have a basic hookup question. What is the best way to connect a Lexicon MX200 ( http://www.lexiconpro.com/product.php?id=12 ) to a Mackie Onyx 1640 mixer? Thanks Link to comment Share on other sites More sharing options...
Members Count Dissident Posted February 22, 2010 Author Members Share Posted February 22, 2010 Ok,I know this is probably a very basic question,but I just want to be sure. Would a TRS from an AUX send on the mixer to the Left(mono) input on the Lexicon and then a TRS from the Left(mono) to the Aux Return on the mixer be a good option? Link to comment Share on other sites More sharing options...
Members Count Dissident Posted February 22, 2010 Author Members Share Posted February 22, 2010 Also,because the Lexicon has a dual processor engine,to run Dual Stereo do I need a TRS cable from two seperate Aux on the the mixer to the Left and Right on the Lexicon and then two more TRS cables from each output to two seperate Aux on the mixer? Will one TRS from a Aux on the mixer to the Left on the Lexicon and then a TRS from the Lexicon to the Aux return on the mixer be stereo? Link to comment Share on other sites More sharing options...
Members Count Dissident Posted February 23, 2010 Author Members Share Posted February 23, 2010 No one has any info on this? Link to comment Share on other sites More sharing options...
Members TimmyP Posted February 23, 2010 Members Share Posted February 23, 2010 The Lexicon manual should describe all the possibilities. I prefer to feed it from an aux and return it to a stereo channel (unless the PA is mono, in which case return one channel to a mono channel or return). Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.