Members hangwire Posted January 3, 2006 Members Share Posted January 3, 2006 I have a green ringer clone... I got it all p2p wired and the led lights with the footswitch... but no sound... I have a digital multi meter... what setting do I have it on to figure out what is not working? GGG is no help tonight... Link to comment Share on other sites More sharing options...
Members shepherdspy Posted January 4, 2006 Members Share Posted January 4, 2006 If it has a continuity setting (where it beeps when there is a connection) you can make sure all the grounds are connected together.Otherwise you can test all the voltages if you have a schematic with the voltages on it or know what they should be. Put the red lead on the point to be tested and the black lead on ground.Also just use your eyes, wiggle wires, and redo all soldered connections. That's right, I wiggle wires and I'm man enough to admit it. Do you get sound in bypass mode? Cause that should work even if nothing else does. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.