Members joelbah Posted May 1, 2006 Members Share Posted May 1, 2006 I am sure there is a ton of good infromation on here already. I tried some searches but couldn't figure out what to search for. Here's what I have: Guitar-->Ibanez TS9 -->Vox Wah--->Amp-->Line 6 DL-4-->Line 6 mm-4--> EB volume pedal---(Tuner output)--->boss TU-2 Is there a better way to order those? Here's what I am not sure about: MM-4 in the loop? MM-4 before or after DL-4? I haven't tried it that much but I am starting to think I might want the MM-4 before the DL-4. I normally just use the MM-4 for some light phase or flange or tremelo...nothing super harshly processed sounding. What would you guys do and why? Link to comment Share on other sites More sharing options...
Members sonaboy Posted May 1, 2006 Members Share Posted May 1, 2006 . strange - my DL 4 hates my line level FX loop, and feeds back terribly if i put it in there, so i put mine out front. Link to comment Share on other sites More sharing options...
Members hbar Posted May 1, 2006 Members Share Posted May 1, 2006 You might consider putting the volume pedal before the TS9, so you can clean up your signal with the pedal as well. That is, unless you don't want to work that sort of majik. Link to comment Share on other sites More sharing options...
Members joelbah Posted May 2, 2006 Author Members Share Posted May 2, 2006 yeah I think that could be cool too, but I just use my guitar volume for that when I need to. Any other suggestions? Do you guys run delay before or after modulation? Link to comment Share on other sites More sharing options...
Members hbar Posted May 2, 2006 Members Share Posted May 2, 2006 I've done it both ways, I don't think I have a strong preference either way. Currently, delay is last. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.