Members Steve Howe Posted December 22, 2006 Members Share Posted December 22, 2006 How do you guys attach pedals to your Pedaltrains? Where do you hide your PP2+? Where do you hide your surge protectors? Thanks! Link to comment Share on other sites More sharing options...
Members fusionexperimen Posted December 22, 2006 Members Share Posted December 22, 2006 I use velcro to attach them to the board. Industrail strength ones made by the "velcro" brand. The strongest i could find. You could always velcro a surge arrest to your board if you want and if you install a PP2 below you'll need to get your pedal train modified cause the PP2 power jack in on the length of the power supply. Theres a guy that posts here and at tgp that does the mod. Otherwise, you can use a t-rex fuel tank where the power jack is on the width and would not require any modification to the pedal train. Heres my board just for a reference. I am using a one spot. I am intending to get a diago power supply to mount it below soon. Link to comment Share on other sites More sharing options...
Members NITEFLY182 Posted December 22, 2006 Members Share Posted December 22, 2006 Velcro on the pedals and the PPII is centered in the back. The pro is big so I have plenty of room on the board to fit everything else. Link to comment Share on other sites More sharing options...
Members Steve Howe Posted December 22, 2006 Author Members Share Posted December 22, 2006 Originally posted by NITEFLY182 Velcro on the pedals and the PPII is centered in the back. The pro is big so I have plenty of room on the board to fit everything else. What patch cables are you using? Link to comment Share on other sites More sharing options...
Members NITEFLY182 Posted December 22, 2006 Members Share Posted December 22, 2006 Canare GS6 assembled by Mark at lavacable Link to comment Share on other sites More sharing options...
Members inscho Posted December 22, 2006 Members Share Posted December 22, 2006 here is an old picture: I zip-tie a dc brick underneath the board and just use standard velcro. Link to comment Share on other sites More sharing options...
Members JDandCoke Posted December 22, 2006 Members Share Posted December 22, 2006 fit the pedals on however you can the power supply just sits on top too... there is a space on there which is now filled in case you were panicking Link to comment Share on other sites More sharing options...
Members inscho Posted December 22, 2006 Members Share Posted December 22, 2006 Originally posted by JDandCoke there is a space on there which is now filled in case you were panicking if you used right angled cables you could easily fit another one on there too Link to comment Share on other sites More sharing options...
Members Fast Frets Posted December 22, 2006 Members Share Posted December 22, 2006 Originally posted by NITEFLY182 [/ Velcro on the pedals and the PPII is centered in the back. The pro is big so I have plenty of room on the board to fit everything else. Nice board:thu: ! How much does that thing weigh? Link to comment Share on other sites More sharing options...
Members JDandCoke Posted December 22, 2006 Members Share Posted December 22, 2006 Originally posted by inscho if you used right angled cables you could easily fit another one on there too im working on it! i now have half my board with right angles.... Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.