Members Sarms58 Posted July 5, 2008 Members Share Posted July 5, 2008 I picked up an amp with an effects loop and and have noticed the certain pedals don't really work in the effects loop...for example, my digitech delay seems to work the same regardless of location but my Sole-Mate Reverb doesn't work in the effects loop. Of course AFTER I played around with variations, I then looked at the instructions for my amp (Frenzel Deluxe Plus) and noticed the following note: Please note this is not for pedals. Pedals are designed for use on the inputs of amps.They are the wrong impedance and do not have the proper output voltage for driving a serial insertion type of effects loop. So, what do you put in the effects loop? Link to comment Share on other sites More sharing options...
Members Belt Posted July 5, 2008 Members Share Posted July 5, 2008 delayreverb is what is usually suggested. Link to comment Share on other sites More sharing options...
Members IvIark Posted July 5, 2008 Members Share Posted July 5, 2008 Rack effects. But there are plenty of people who use pedals in the loop, although I'm sure that some pedals will not like the line level signal. Link to comment Share on other sites More sharing options...
Members gusvolta Posted July 6, 2008 Members Share Posted July 6, 2008 eq, chorus, delay. is what i put in the loop Link to comment Share on other sites More sharing options...
Members Jules-RM Posted July 6, 2008 Members Share Posted July 6, 2008 I put Modulation, Delay and Reverb in my efx loop and it sounds good to me. Depends on the amp, I think. My old Yamaha T50's loop was just dreadful, I used to put everything in front. Link to comment Share on other sites More sharing options...
Members theinTIMidator Posted July 6, 2008 Members Share Posted July 6, 2008 I have a delay, reverb, eq and looper in the loop ATM. Link to comment Share on other sites More sharing options...
Members WWW Posted July 6, 2008 Members Share Posted July 6, 2008 Sell me your sole mate. Then you don't have to worry about it:idea: Link to comment Share on other sites More sharing options...
Members NetStar Posted July 6, 2008 Members Share Posted July 6, 2008 I suggest a FAQ thread Link to comment Share on other sites More sharing options...
Members Ultra.Fuzz Posted July 6, 2008 Members Share Posted July 6, 2008 http://www.amptone.com/g182.htm (this site has lots of info on other stuff as well...) It depends on specifications/levels but for the most part it's just a case of whatever you see fit. I actually think the "effects post amp please" thing makes sense, but it just wouldn't work for some applications. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.