Jump to content

Poor mans SPLITTER BOX


Recommended Posts

  • Members

3 'Y' cables.

Plug the first one into the output of whatever your source is, then plug one into each of the first Y cable's ends. It might look something like this:

|...........|.|..........|
|...........|.|..........|
........../..|........./
........./........../
......../........../
....../........../
......|...........|
-----------------------------
......|...........|
......|...........|
................/
.............../
............../
............/
............|
............|



Make sense? Of course the sound quality would be utter {censored} and you will have no way of switching outputs. If you want good sound and the ability to change where the signal travels to, you will have to buy splitter box.

:thu:

Link to comment
Share on other sites

  • Members

This is a DIY kind of thing, the closest thing that you can buy is the morley tripler. Its not that hard of a build, but splitting the signal four ways with no buffer is not gonna sound that great. Adding a buffer to the project will raise the hardness level of the project.

Link to comment
Share on other sites

  • Members

robopimp, will you teach me?

 

 

sure, first you get yourself a really big nail to solder with, a pair of pliers to hold the nail with and a blowtorch to heat the nail up, when you can solder a speaker cable with this arrangement get back to me and we'll start phase two of your training.

Link to comment
Share on other sites

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...